TIM Output Compare Configuration Structure definition. More...

#include <stm32f4xx_hal_tim.h>

Data Fields
uint32_t	OCMode
uint32_t	Pulse
uint32_t	OCPolarity
uint32_t	OCNPolarity
uint32_t	OCFastMode
uint32_t	OCIdleState
uint32_t	OCNIdleState

Detailed Description

TIM Output Compare Configuration Structure definition.

Definition at line 92 of file stm32f4xx_hal_tim.h.

Field Documentation

uint32_t TIM_OC_InitTypeDef::OCFastMode

Specifies the Fast mode state. This parameter can be a value of TIM Output Fast State

Note:: This parameter is valid only in PWM1 and PWM2 mode.

Definition at line 107 of file stm32f4xx_hal_tim.h.

Referenced by HAL_TIM_PWM_ConfigChannel(), and HAL_TIMEx_HallSensor_Init().

uint32_t TIM_OC_InitTypeDef::OCIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM Output Compare Idle State

Note:: This parameter is valid only for TIM1 and TIM8.

Definition at line 112 of file stm32f4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel(), HAL_TIMEx_HallSensor_Init(), TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), TIM_OC3_SetConfig(), and TIM_OC4_SetConfig().

uint32_t TIM_OC_InitTypeDef::OCMode

Specifies the TIM mode. This parameter can be a value of TIM Output Compare and PWM modes

Definition at line 94 of file stm32f4xx_hal_tim.h.

Referenced by HAL_TIM_OC_ConfigChannel(), HAL_TIM_OnePulse_ConfigChannel(), HAL_TIM_PWM_ConfigChannel(), HAL_TIMEx_HallSensor_Init(), TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), TIM_OC3_SetConfig(), and TIM_OC4_SetConfig().

uint32_t TIM_OC_InitTypeDef::OCNIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM Output Compare N Idle State

Note:: This parameter is valid only for TIM1 and TIM8.

Definition at line 116 of file stm32f4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel(), HAL_TIMEx_HallSensor_Init(), TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), and TIM_OC3_SetConfig().

uint32_t TIM_OC_InitTypeDef::OCNPolarity

Specifies the complementary output polarity. This parameter can be a value of TIM Output CompareN Polarity

Note:: This parameter is valid only for TIM1 and TIM8.

Definition at line 103 of file stm32f4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel(), HAL_TIMEx_HallSensor_Init(), TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), and TIM_OC3_SetConfig().

uint32_t TIM_OC_InitTypeDef::OCPolarity

Specifies the output polarity. This parameter can be a value of TIM Output Compare Polarity

Definition at line 100 of file stm32f4xx_hal_tim.h.

Referenced by HAL_TIM_OC_ConfigChannel(), HAL_TIM_OnePulse_ConfigChannel(), HAL_TIM_PWM_ConfigChannel(), HAL_TIMEx_HallSensor_Init(), TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), TIM_OC3_SetConfig(), and TIM_OC4_SetConfig().

uint32_t TIM_OC_InitTypeDef::Pulse

Specifies the pulse value to be loaded into the Capture Compare Register. This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU

Definition at line 97 of file stm32f4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel(), HAL_TIMEx_HallSensor_Init(), TIM_OC1_SetConfig(), TIM_OC2_SetConfig(), TIM_OC3_SetConfig(), and TIM_OC4_SetConfig().

The documentation for this struct was generated from the following file:

stm32f4xx_hal_tim.h

Data Fields

Detailed Description

Field Documentation