TIM_OnePulse_InitTypeDef Struct Reference

TIM One Pulse Mode Configuration Structure definition. More...

#include <stm32l4xx_hal_tim.h>

Data Fields
uint32_t	OCMode
uint32_t	Pulse
uint32_t	OCPolarity
uint32_t	OCNPolarity
uint32_t	OCIdleState
uint32_t	OCNIdleState
uint32_t	ICPolarity
uint32_t	ICSelection
uint32_t	ICFilter

---

Detailed Description

TIM One Pulse Mode Configuration Structure definition.

Definition at line 126 of file stm32l4xx_hal_tim.h.

---

Field Documentation

uint32_t TIM_OnePulse_InitTypeDef::ICFilter

Specifies the input capture filter. This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF

Definition at line 155 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::ICPolarity

Specifies the active edge of the input signal. This parameter can be a value of TIM Input Capture Polarity

Definition at line 149 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::ICSelection

Specifies the input. This parameter can be a value of TIM Input Capture Selection

Definition at line 152 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::OCIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM Output Compare Idle State

Note:

This parameter is valid only for timer instances supporting break feature.

Definition at line 141 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::OCMode

Specifies the TIM mode. This parameter can be a value of TIM Output Compare and PWM Modes

Definition at line 128 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::OCNIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM Complementary Output Compare Idle State

Note:

This parameter is valid only for timer instances supporting break feature.

Definition at line 145 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::OCNPolarity

Specifies the complementary output polarity. This parameter can be a value of TIM Complementary Output Compare Polarity

Note:

This parameter is valid only for timer instances supporting break feature.

Definition at line 137 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::OCPolarity

Specifies the output polarity. This parameter can be a value of TIM Output Compare Polarity

Definition at line 134 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

uint32_t TIM_OnePulse_InitTypeDef::Pulse

Specifies the pulse value to be loaded into the Capture Compare Register. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF

Definition at line 131 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIM_OnePulse_ConfigChannel().

---

The documentation for this struct was generated from the following file:

• stm32l4xx_hal_tim.h