TIM_BreakDeadTimeConfigTypeDef Struct Reference

TIM Break input(s) and Dead time configuration Structure definition. More...

#include <stm32l4xx_hal_tim.h>

Data Fields
uint32_t	OffStateRunMode
uint32_t	OffStateIDLEMode
uint32_t	LockLevel
uint32_t	DeadTime
uint32_t	BreakState
uint32_t	BreakPolarity
uint32_t	BreakFilter
uint32_t	Break2State
uint32_t	Break2Polarity
uint32_t	Break2Filter
uint32_t	AutomaticOutput

---

Detailed Description

TIM Break input(s) and Dead time configuration Structure definition.

Note:

2 break inputs can be configured (BKIN and BKIN2) with configurable filter and polarity.

Definition at line 280 of file stm32l4xx_hal_tim.h.

---

Field Documentation

uint32_t TIM_BreakDeadTimeConfigTypeDef::AutomaticOutput

TIM Automatic Output Enable state This parameter can be a value of TIM Automatic Output Enable

Definition at line 302 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::Break2Filter

TIM break2 input filter. This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF

Definition at line 300 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::Break2Polarity

TIM Break2 input polarity This parameter can be a value of TIM Break Input 2 Polarity

Definition at line 298 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::Break2State

TIM Break2 State This parameter can be a value of TIM Break input 2 Enable

Definition at line 296 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::BreakFilter

Specifies the break input filter. This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF

Definition at line 294 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::BreakPolarity

TIM Break input polarity This parameter can be a value of TIM Break Input Polarity

Definition at line 292 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::BreakState

TIM Break State This parameter can be a value of TIM Break Input Enable

Definition at line 290 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::DeadTime

TIM dead Time This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF

Definition at line 288 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::LockLevel

TIM Lock level This parameter can be a value of TIM Lock level

Definition at line 286 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::OffStateIDLEMode

TIM off state in IDLE mode This parameter can be a value of TIM OSSI OffState Selection for Idle mode state

Definition at line 284 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

uint32_t TIM_BreakDeadTimeConfigTypeDef::OffStateRunMode

TIM off state in run mode This parameter can be a value of TIM OSSR OffState Selection for Run mode state

Definition at line 282 of file stm32l4xx_hal_tim.h.

Referenced by HAL_TIMEx_ConfigBreakDeadTime().

---

The documentation for this struct was generated from the following file:

• stm32l4xx_hal_tim.h