Configuration of ADC hierarchical scope: multimode

Functions
__STATIC_INLINE void	LL_ADC_SetMultimode (ADC_Common_TypeDef *ADCxy_COMMON, uint32_t Multimode)
	Set ADC multimode configuration to operate in independent mode or multimode (for devices with several ADC instances).
__STATIC_INLINE uint32_t	LL_ADC_GetMultimode (ADC_Common_TypeDef *ADCxy_COMMON)
	Get ADC multimode configuration to operate in independent mode or multimode (for devices with several ADC instances).
__STATIC_INLINE void	LL_ADC_SetMultiDMATransfer (ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiDMATransfer)
	Set ADC multimode conversion data transfer: no transfer or transfer by DMA.
__STATIC_INLINE uint32_t	LL_ADC_GetMultiDMATransfer (ADC_Common_TypeDef *ADCxy_COMMON)
	Get ADC multimode conversion data transfer: no transfer or transfer by DMA.
__STATIC_INLINE void	LL_ADC_SetMultiTwoSamplingDelay (ADC_Common_TypeDef *ADCxy_COMMON, uint32_t MultiTwoSamplingDelay)
	Set ADC multimode delay between 2 sampling phases.
__STATIC_INLINE uint32_t	LL_ADC_GetMultiTwoSamplingDelay (ADC_Common_TypeDef *ADCxy_COMMON)
	Get ADC multimode delay between 2 sampling phases.

---

Function Documentation

__STATIC_INLINE uint32_t LL_ADC_GetMultiDMATransfer

(

ADC_Common_TypeDef *

ADCxy_COMMON

)

Get ADC multimode conversion data transfer: no transfer or transfer by DMA.

Note:

If ADC multimode transfer by DMA is not selected: each ADC uses its own DMA channel, with its individual DMA transfer settings. If ADC multimode transfer by DMA is selected: One DMA channel is used for both ADC (DMA of ADC master) Specifies the DMA requests mode:

• Limited mode (One shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular.
• Unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transfers (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular.

If ADC DMA requests mode is set to unlimited and DMA is set to mode non-circular: when DMA transfers size will be reached, DMA will stop transfers of ADC conversions data ADC will raise an overrun error (overrun flag and interruption if enabled).

How to retrieve multimode conversion data: Whatever multimode transfer by DMA setting: using function LL_ADC_REG_ReadMultiConversionData32(). If ADC multimode transfer by DMA is selected: conversion data is a raw data with ADC master and slave concatenated. A macro is available to get the conversion data of ADC master or ADC slave: see helper macro __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE().

Reference Manual to LL API cross reference:

CCR MDMA LL_ADC_GetMultiDMATransfer
CCR DDS LL_ADC_GetMultiDMATransfer

Parameters:

ADCxy_COMMON

ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )

Return values:

Returned

value can be one of the following values: LL_ADC_MULTI_REG_DMA_EACH_ADC LL_ADC_MULTI_REG_DMA_LIMIT_1 LL_ADC_MULTI_REG_DMA_LIMIT_2 LL_ADC_MULTI_REG_DMA_LIMIT_3 LL_ADC_MULTI_REG_DMA_UNLMT_1 LL_ADC_MULTI_REG_DMA_UNLMT_2 LL_ADC_MULTI_REG_DMA_UNLMT_3

Definition at line 3692 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE uint32_t LL_ADC_GetMultimode

(

ADC_Common_TypeDef *

ADCxy_COMMON

)

Get ADC multimode configuration to operate in independent mode or multimode (for devices with several ADC instances).

Note:

If multimode configuration: the selected ADC instance is either master or slave depending on hardware. Refer to reference manual.

Reference Manual to LL API cross reference:

CCR MULTI LL_ADC_GetMultimode

Parameters:

ADCxy_COMMON

ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )

Return values:

Returned

value can be one of the following values: LL_ADC_MULTI_INDEPENDENT LL_ADC_MULTI_DUAL_REG_SIMULT LL_ADC_MULTI_DUAL_REG_INTERL LL_ADC_MULTI_DUAL_INJ_SIMULT LL_ADC_MULTI_DUAL_INJ_ALTERN LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT LL_ADC_MULTI_TRIPLE_INJ_SIMULT LL_ADC_MULTI_TRIPLE_REG_SIMULT LL_ADC_MULTI_TRIPLE_REG_INTERL LL_ADC_MULTI_TRIPLE_INJ_ALTERN

Definition at line 3595 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE uint32_t LL_ADC_GetMultiTwoSamplingDelay

(

ADC_Common_TypeDef *

ADCxy_COMMON

)

Get ADC multimode delay between 2 sampling phases.

Reference Manual to LL API cross reference:

CCR DELAY LL_ADC_GetMultiTwoSamplingDelay

Parameters:

ADCxy_COMMON

ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )

Return values:

Returned

value can be one of the following values: LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES

Definition at line 3754 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE void LL_ADC_SetMultiDMATransfer	(	ADC_Common_TypeDef *	ADCxy_COMMON,
		uint32_t	MultiDMATransfer
	)

Set ADC multimode conversion data transfer: no transfer or transfer by DMA.

Note:

If ADC multimode transfer by DMA is not selected: each ADC uses its own DMA channel, with its individual DMA transfer settings. If ADC multimode transfer by DMA is selected: One DMA channel is used for both ADC (DMA of ADC master) Specifies the DMA requests mode:

• Limited mode (One shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular.
• Unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transfers (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular.

If ADC DMA requests mode is set to unlimited and DMA is set to mode non-circular: when DMA transfers size will be reached, DMA will stop transfers of ADC conversions data ADC will raise an overrun error (overrun flag and interruption if enabled).

How to retrieve multimode conversion data: Whatever multimode transfer by DMA setting: using function LL_ADC_REG_ReadMultiConversionData32(). If ADC multimode transfer by DMA is selected: conversion data is a raw data with ADC master and slave concatenated. A macro is available to get the conversion data of ADC master or ADC slave: see helper macro __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE().

Reference Manual to LL API cross reference:

CCR MDMA LL_ADC_SetMultiDMATransfer
CCR DDS LL_ADC_SetMultiDMATransfer

Parameters:

ADCxy_COMMON	ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )
MultiDMATransfer	This parameter can be one of the following values: LL_ADC_MULTI_REG_DMA_EACH_ADC LL_ADC_MULTI_REG_DMA_LIMIT_1 LL_ADC_MULTI_REG_DMA_LIMIT_2 LL_ADC_MULTI_REG_DMA_LIMIT_3 LL_ADC_MULTI_REG_DMA_UNLMT_1 LL_ADC_MULTI_REG_DMA_UNLMT_2 LL_ADC_MULTI_REG_DMA_UNLMT_3

Return values:

None

Definition at line 3644 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE void LL_ADC_SetMultimode	(	ADC_Common_TypeDef *	ADCxy_COMMON,
		uint32_t	Multimode
	)

Set ADC multimode configuration to operate in independent mode or multimode (for devices with several ADC instances).

Note:

If multimode configuration: the selected ADC instance is either master or slave depending on hardware. Refer to reference manual.

Reference Manual to LL API cross reference:

CCR MULTI LL_ADC_SetMultimode

Parameters:

ADCxy_COMMON

ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )

Multimode

This parameter can be one of the following values: LL_ADC_MULTI_INDEPENDENT LL_ADC_MULTI_DUAL_REG_SIMULT LL_ADC_MULTI_DUAL_REG_INTERL LL_ADC_MULTI_DUAL_INJ_SIMULT LL_ADC_MULTI_DUAL_INJ_ALTERN LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT LL_ADC_MULTI_TRIPLE_INJ_SIMULT LL_ADC_MULTI_TRIPLE_REG_SIMULT LL_ADC_MULTI_TRIPLE_REG_INTERL LL_ADC_MULTI_TRIPLE_INJ_ALTERN

Return values:

None

Definition at line 3565 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE void LL_ADC_SetMultiTwoSamplingDelay	(	ADC_Common_TypeDef *	ADCxy_COMMON,
		uint32_t	MultiTwoSamplingDelay
	)

Set ADC multimode delay between 2 sampling phases.

Note:

The sampling delay range depends on ADC resolution:

• ADC resolution 12 bits can have maximum delay of 12 cycles.
• ADC resolution 10 bits can have maximum delay of 10 cycles.
• ADC resolution 8 bits can have maximum delay of 8 cycles.
• ADC resolution 6 bits can have maximum delay of 6 cycles.

Reference Manual to LL API cross reference:

CCR DELAY LL_ADC_SetMultiTwoSamplingDelay

Parameters:

ADCxy_COMMON

ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )

MultiTwoSamplingDelay

This parameter can be one of the following values: LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES

Return values:

None

Definition at line 3726 of file stm32f4xx_ll_adc.h.