STM32L486xx HAL User Manual
|
This file provides firmware functions to manage the following functionalities of the Analog to Digital Convertor (ADC) peripheral: + Operation functions ++ Start, stop, get result of conversions of ADC group injected, using 2 possible modes: polling, interruption. ++ Calibration +++ ADC automatic self-calibration +++ Calibration factors get or set ++ Multimode feature when available + Control functions ++ Channels configuration on ADC group injected + State functions ++ ADC group injected contexts queue management Other functions (generic functions) are available in file "stm32l4xx_hal_adc.c". More...
#include "stm32l4xx_hal.h"
Go to the source code of this file.
Defines | |
#define | ADC_JSQR_FIELDS |
#define | ADC_CALIBRATION_TIMEOUT (296960U) |
Functions | |
HAL_StatusTypeDef | HAL_ADCEx_Calibration_Start (ADC_HandleTypeDef *hadc, uint32_t SingleDiff) |
Perform an ADC automatic self-calibration Calibration prerequisite: ADC must be disabled (execute this function before HAL_ADC_Start() or after HAL_ADC_Stop() ). | |
uint32_t | HAL_ADCEx_Calibration_GetValue (ADC_HandleTypeDef *hadc, uint32_t SingleDiff) |
Get the calibration factor. | |
HAL_StatusTypeDef | HAL_ADCEx_Calibration_SetValue (ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor) |
Set the calibration factor to overwrite automatic conversion result. | |
HAL_StatusTypeDef | HAL_ADCEx_InjectedStart (ADC_HandleTypeDef *hadc) |
Enable ADC, start conversion of injected group. | |
HAL_StatusTypeDef | HAL_ADCEx_InjectedStop (ADC_HandleTypeDef *hadc) |
Stop conversion of injected channels. | |
HAL_StatusTypeDef | HAL_ADCEx_InjectedPollForConversion (ADC_HandleTypeDef *hadc, uint32_t Timeout) |
Wait for injected group conversion to be completed. | |
HAL_StatusTypeDef | HAL_ADCEx_InjectedStart_IT (ADC_HandleTypeDef *hadc) |
Enable ADC, start conversion of injected group with interruption. | |
HAL_StatusTypeDef | HAL_ADCEx_InjectedStop_IT (ADC_HandleTypeDef *hadc) |
Stop conversion of injected channels, disable interruption of end-of-conversion. | |
HAL_StatusTypeDef | HAL_ADCEx_MultiModeStart_DMA (ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) |
Enable ADC, start MultiMode conversion and transfer regular results through DMA. | |
HAL_StatusTypeDef | HAL_ADCEx_MultiModeStop_DMA (ADC_HandleTypeDef *hadc) |
Stop multimode ADC conversion, disable ADC DMA transfer, disable ADC peripheral. | |
uint32_t | HAL_ADCEx_MultiModeGetValue (ADC_HandleTypeDef *hadc) |
Return the last ADC Master and Slave regular conversions results when in multimode configuration. | |
uint32_t | HAL_ADCEx_InjectedGetValue (ADC_HandleTypeDef *hadc, uint32_t InjectedRank) |
Get ADC injected group conversion result. | |
__weak void | HAL_ADCEx_InjectedConvCpltCallback (ADC_HandleTypeDef *hadc) |
Injected conversion complete callback in non-blocking mode. | |
__weak void | HAL_ADCEx_InjectedQueueOverflowCallback (ADC_HandleTypeDef *hadc) |
Injected context queue overflow callback. | |
__weak void | HAL_ADCEx_LevelOutOfWindow2Callback (ADC_HandleTypeDef *hadc) |
Analog watchdog 2 callback in non-blocking mode. | |
__weak void | HAL_ADCEx_LevelOutOfWindow3Callback (ADC_HandleTypeDef *hadc) |
Analog watchdog 3 callback in non-blocking mode. | |
__weak void | HAL_ADCEx_EndOfSamplingCallback (ADC_HandleTypeDef *hadc) |
End Of Sampling callback in non-blocking mode. | |
HAL_StatusTypeDef | HAL_ADCEx_RegularStop (ADC_HandleTypeDef *hadc) |
Stop ADC conversion of regular group (and injected channels in case of auto_injection mode), disable ADC peripheral if no conversion is on going on injected group. | |
HAL_StatusTypeDef | HAL_ADCEx_RegularStop_IT (ADC_HandleTypeDef *hadc) |
Stop ADC conversion of ADC groups regular and injected, disable interrution of end-of-conversion, disable ADC peripheral if no conversion is on going on injected group. | |
HAL_StatusTypeDef | HAL_ADCEx_RegularStop_DMA (ADC_HandleTypeDef *hadc) |
Stop ADC conversion of regular group (and injected group in case of auto_injection mode), disable ADC DMA transfer, disable ADC peripheral if no conversion is on going on injected group. | |
HAL_StatusTypeDef | HAL_ADCEx_RegularMultiModeStop_DMA (ADC_HandleTypeDef *hadc) |
Stop DMA-based multimode ADC conversion, disable ADC DMA transfer, disable ADC peripheral if no injected conversion is on-going. | |
HAL_StatusTypeDef | HAL_ADCEx_InjectedConfigChannel (ADC_HandleTypeDef *hadc, ADC_InjectionConfTypeDef *sConfigInjected) |
Configure a channel to be assigned to ADC group injected. | |
HAL_StatusTypeDef | HAL_ADCEx_MultiModeConfigChannel (ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode) |
Enable ADC multimode and configure multimode parameters. | |
HAL_StatusTypeDef | HAL_ADCEx_EnableInjectedQueue (ADC_HandleTypeDef *hadc) |
Enable Injected Queue. | |
HAL_StatusTypeDef | HAL_ADCEx_DisableInjectedQueue (ADC_HandleTypeDef *hadc) |
Disable Injected Queue. | |
HAL_StatusTypeDef | HAL_ADCEx_DisableVoltageRegulator (ADC_HandleTypeDef *hadc) |
Disable ADC voltage regulator. | |
HAL_StatusTypeDef | HAL_ADCEx_EnterADCDeepPowerDownMode (ADC_HandleTypeDef *hadc) |
Enter ADC deep-power-down mode. |
This file provides firmware functions to manage the following functionalities of the Analog to Digital Convertor (ADC) peripheral: + Operation functions ++ Start, stop, get result of conversions of ADC group injected, using 2 possible modes: polling, interruption. ++ Calibration +++ ADC automatic self-calibration +++ Calibration factors get or set ++ Multimode feature when available + Control functions ++ Channels configuration on ADC group injected + State functions ++ ADC group injected contexts queue management Other functions (generic functions) are available in file "stm32l4xx_hal_adc.c".
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32l4xx_hal_adc_ex.c.