|
STM32L486xx HAL User Manual
|
Functions | |
| HAL_StatusTypeDef | HAL_SMBUS_Master_Transmit_IT (SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) |
| Transmit in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_Master_Receive_IT (SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) |
| Receive in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_Master_Abort_IT (SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress) |
| Abort a master/host SMBUS process communication with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_Slave_Transmit_IT (SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions) |
| Transmit in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_Slave_Receive_IT (SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions) |
| Receive in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_EnableAlert_IT (SMBUS_HandleTypeDef *hsmbus) |
| Enable the SMBUS alert mode with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_DisableAlert_IT (SMBUS_HandleTypeDef *hsmbus) |
| Disable the SMBUS alert mode with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_EnableListen_IT (SMBUS_HandleTypeDef *hsmbus) |
| Enable the Address listen mode with Interrupt. | |
| HAL_StatusTypeDef | HAL_SMBUS_DisableListen_IT (SMBUS_HandleTypeDef *hsmbus) |
| Disable the Address listen mode with Interrupt. | |
| HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT | ( | SMBUS_HandleTypeDef * | hsmbus | ) |
Disable the SMBUS alert mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUSx peripheral. |
| HAL | status |
Definition at line 1400 of file stm32l4xx_hal_smbus.c.
References __SMBUS_HandleTypeDef::Instance, SMBUS_Disable_IRQ(), and SMBUS_IT_ALERT.
| HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT | ( | SMBUS_HandleTypeDef * | hsmbus | ) |
Disable the Address listen mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUS. |
| HAL | status |
Definition at line 1357 of file stm32l4xx_hal_smbus.c.
References HAL_SMBUS_STATE_LISTEN, HAL_SMBUS_STATE_READY, SMBUS_Disable_IRQ(), SMBUS_IT_ADDR, and __SMBUS_HandleTypeDef::State.
| HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT | ( | SMBUS_HandleTypeDef * | hsmbus | ) |
Enable the SMBUS alert mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUSx peripheral. |
| HAL | status |
Definition at line 1381 of file stm32l4xx_hal_smbus.c.
References __HAL_SMBUS_CLEAR_FLAG, __SMBUS_HandleTypeDef::Instance, SMBUS_Enable_IRQ(), SMBUS_FLAG_ALERT, and SMBUS_IT_ALERT.
| HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT | ( | SMBUS_HandleTypeDef * | hsmbus | ) |
Enable the Address listen mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUS. |
| HAL | status |
Definition at line 1341 of file stm32l4xx_hal_smbus.c.
References HAL_SMBUS_STATE_LISTEN, SMBUS_Enable_IRQ(), SMBUS_IT_ADDR, and __SMBUS_HandleTypeDef::State.
| HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT | ( | SMBUS_HandleTypeDef * | hsmbus, |
| uint16_t | DevAddress | ||
| ) |
Abort a master/host SMBUS process communication with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUS. |
| DevAddress | Target device address: The device 7 bits address value in datasheet must be shifted to the left before calling the interface |
| HAL | status |
Definition at line 1106 of file stm32l4xx_hal_smbus.c.
References __SMBUS_HandleTypeDef::ErrorCode, HAL_SMBUS_ERROR_NONE, HAL_SMBUS_STATE_MASTER_BUSY_RX, HAL_SMBUS_STATE_MASTER_BUSY_TX, HAL_SMBUS_STATE_READY, __SMBUS_HandleTypeDef::PreviousState, SMBUS_AUTOEND_MODE, SMBUS_Enable_IRQ(), SMBUS_IT_RX, SMBUS_IT_TX, SMBUS_NO_STARTSTOP, SMBUS_TransferConfig(), and __SMBUS_HandleTypeDef::State.
| HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT | ( | SMBUS_HandleTypeDef * | hsmbus, |
| uint16_t | DevAddress, | ||
| uint8_t * | pData, | ||
| uint16_t | Size, | ||
| uint32_t | XferOptions | ||
| ) |
Receive in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUS. |
| DevAddress | Target device address: The device 7 bits address value in datasheet must be shifted to the left before calling the interface |
| pData | Pointer to data buffer |
| Size | Amount of data to be sent |
| XferOptions | Options of Transfer, value of SMBUS XferOptions definition |
| HAL | status |
Definition at line 1022 of file stm32l4xx_hal_smbus.c.
References assert_param, __SMBUS_HandleTypeDef::ErrorCode, HAL_SMBUS_ERROR_NONE, HAL_SMBUS_STATE_MASTER_BUSY_RX, HAL_SMBUS_STATE_READY, IS_SMBUS_TRANSFER_OPTIONS_REQUEST, IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST, MAX_NBYTE_SIZE, __SMBUS_HandleTypeDef::pBuffPtr, __SMBUS_HandleTypeDef::PreviousState, SMBUS_AUTOEND_MODE, SMBUS_ConvertOtherXferOptions(), SMBUS_Enable_IRQ(), SMBUS_GENERATE_START_READ, SMBUS_IT_RX, SMBUS_NO_STARTSTOP, SMBUS_RELOAD_MODE, SMBUS_SENDPEC_MODE, SMBUS_TransferConfig(), __SMBUS_HandleTypeDef::State, __SMBUS_HandleTypeDef::XferCount, __SMBUS_HandleTypeDef::XferOptions, and __SMBUS_HandleTypeDef::XferSize.
| HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT | ( | SMBUS_HandleTypeDef * | hsmbus, |
| uint16_t | DevAddress, | ||
| uint8_t * | pData, | ||
| uint16_t | Size, | ||
| uint32_t | XferOptions | ||
| ) |
Transmit in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUS. |
| DevAddress | Target device address: The device 7 bits address value in datasheet must be shifted to the left before calling the interface |
| pData | Pointer to data buffer |
| Size | Amount of data to be sent |
| XferOptions | Options of Transfer, value of SMBUS XferOptions definition |
| HAL | status |
Definition at line 929 of file stm32l4xx_hal_smbus.c.
References assert_param, __SMBUS_HandleTypeDef::ErrorCode, HAL_SMBUS_ERROR_NONE, HAL_SMBUS_STATE_MASTER_BUSY_TX, HAL_SMBUS_STATE_READY, IS_SMBUS_TRANSFER_OPTIONS_REQUEST, IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST, MAX_NBYTE_SIZE, __SMBUS_HandleTypeDef::pBuffPtr, __SMBUS_HandleTypeDef::PreviousState, SMBUS_AUTOEND_MODE, SMBUS_ConvertOtherXferOptions(), SMBUS_Enable_IRQ(), SMBUS_GENERATE_START_WRITE, SMBUS_GET_PEC_MODE, SMBUS_IT_TX, SMBUS_NO_STARTSTOP, SMBUS_RELOAD_MODE, SMBUS_SENDPEC_MODE, SMBUS_TransferConfig(), __SMBUS_HandleTypeDef::State, __SMBUS_HandleTypeDef::XferCount, __SMBUS_HandleTypeDef::XferOptions, and __SMBUS_HandleTypeDef::XferSize.
| HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT | ( | SMBUS_HandleTypeDef * | hsmbus, |
| uint8_t * | pData, | ||
| uint16_t | Size, | ||
| uint32_t | XferOptions | ||
| ) |
Receive in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUS. |
| pData | Pointer to data buffer |
| Size | Amount of data to be sent |
| XferOptions | Options of Transfer, value of SMBUS XferOptions definition |
| HAL | status |
Definition at line 1264 of file stm32l4xx_hal_smbus.c.
References __HAL_SMBUS_CLEAR_FLAG, assert_param, __SMBUS_HandleTypeDef::ErrorCode, HAL_SMBUS_ERROR_NONE, HAL_SMBUS_STATE_LISTEN, HAL_SMBUS_STATE_SLAVE_BUSY_RX, __SMBUS_HandleTypeDef::Instance, IS_SMBUS_TRANSFER_OPTIONS_REQUEST, __SMBUS_HandleTypeDef::pBuffPtr, SMBUS_ConvertOtherXferOptions(), SMBUS_Disable_IRQ(), SMBUS_Enable_IRQ(), SMBUS_FLAG_ADDR, SMBUS_GET_PEC_MODE, SMBUS_IT_ADDR, SMBUS_IT_RX, SMBUS_NO_STARTSTOP, SMBUS_RELOAD_MODE, SMBUS_TransferConfig(), __SMBUS_HandleTypeDef::State, __SMBUS_HandleTypeDef::XferCount, __SMBUS_HandleTypeDef::XferOptions, and __SMBUS_HandleTypeDef::XferSize.
| HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT | ( | SMBUS_HandleTypeDef * | hsmbus, |
| uint8_t * | pData, | ||
| uint16_t | Size, | ||
| uint32_t | XferOptions | ||
| ) |
Transmit in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt.
| hsmbus | Pointer to a SMBUS_HandleTypeDef structure that contains the configuration information for the specified SMBUS. |
| pData | Pointer to data buffer |
| Size | Amount of data to be sent |
| XferOptions | Options of Transfer, value of SMBUS XferOptions definition |
| HAL | status |
Definition at line 1171 of file stm32l4xx_hal_smbus.c.
References __HAL_SMBUS_CLEAR_FLAG, assert_param, __SMBUS_HandleTypeDef::ErrorCode, HAL_SMBUS_ERROR_NONE, HAL_SMBUS_STATE_LISTEN, HAL_SMBUS_STATE_SLAVE_BUSY_TX, __SMBUS_HandleTypeDef::Instance, IS_SMBUS_TRANSFER_OPTIONS_REQUEST, MAX_NBYTE_SIZE, __SMBUS_HandleTypeDef::pBuffPtr, SMBUS_ConvertOtherXferOptions(), SMBUS_Disable_IRQ(), SMBUS_Enable_IRQ(), SMBUS_FLAG_ADDR, SMBUS_GET_PEC_MODE, SMBUS_IT_ADDR, SMBUS_IT_TX, SMBUS_NO_STARTSTOP, SMBUS_RELOAD_MODE, SMBUS_SENDPEC_MODE, SMBUS_TransferConfig(), __SMBUS_HandleTypeDef::State, __SMBUS_HandleTypeDef::XferCount, __SMBUS_HandleTypeDef::XferOptions, and __SMBUS_HandleTypeDef::XferSize.
1.7.6.1