STM32L486xx HAL User Manual
|
Functions | |
__STATIC_INLINE void | LL_EXTI_EnableIT_0_31 (uint32_t ExtiLine) |
Enable ExtiLine Interrupt request for Lines in range 0 to 31. | |
__STATIC_INLINE void | LL_EXTI_EnableIT_32_63 (uint32_t ExtiLine) |
Enable ExtiLine Interrupt request for Lines in range 32 to 63. | |
__STATIC_INLINE void | LL_EXTI_DisableIT_0_31 (uint32_t ExtiLine) |
Disable ExtiLine Interrupt request for Lines in range 0 to 31. | |
__STATIC_INLINE void | LL_EXTI_DisableIT_32_63 (uint32_t ExtiLine) |
Disable ExtiLine Interrupt request for Lines in range 32 to 63. | |
__STATIC_INLINE uint32_t | LL_EXTI_IsEnabledIT_0_31 (uint32_t ExtiLine) |
Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31. | |
__STATIC_INLINE uint32_t | LL_EXTI_IsEnabledIT_32_63 (uint32_t ExtiLine) |
Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63. |
__STATIC_INLINE void LL_EXTI_DisableIT_0_31 | ( | uint32_t | ExtiLine | ) |
Disable ExtiLine Interrupt request for Lines in range 0 to 31.
None |
Definition at line 392 of file stm32l4xx_ll_exti.h.
Referenced by HAL_COMP_Init(), and LL_EXTI_Init().
__STATIC_INLINE void LL_EXTI_DisableIT_32_63 | ( | uint32_t | ExtiLine | ) |
Disable ExtiLine Interrupt request for Lines in range 32 to 63.
ExtiLine | This parameter can be one of the following values: |
None |
Definition at line 417 of file stm32l4xx_ll_exti.h.
Referenced by LL_EXTI_Init().
__STATIC_INLINE void LL_EXTI_EnableIT_0_31 | ( | uint32_t | ExtiLine | ) |
Enable ExtiLine Interrupt request for Lines in range 0 to 31.
None |
Definition at line 320 of file stm32l4xx_ll_exti.h.
Referenced by HAL_COMP_Init(), and LL_EXTI_Init().
__STATIC_INLINE void LL_EXTI_EnableIT_32_63 | ( | uint32_t | ExtiLine | ) |
Enable ExtiLine Interrupt request for Lines in range 32 to 63.
ExtiLine | This parameter can be one of the following values: |
None |
Definition at line 344 of file stm32l4xx_ll_exti.h.
Referenced by LL_EXTI_Init().
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31 | ( | uint32_t | ExtiLine | ) |
Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31.
State | of bit (1 or 0). |
Definition at line 465 of file stm32l4xx_ll_exti.h.
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63 | ( | uint32_t | ExtiLine | ) |
Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63.
ExtiLine | This parameter can be one of the following values: |
State | of bit (1 or 0). |
Definition at line 490 of file stm32l4xx_ll_exti.h.