STM32L486xx HAL User Manual
|
Functions | |
__STATIC_INLINE uint32_t | LL_EXTI_IsActiveFlag_0_31 (uint32_t ExtiLine) |
Check if the ExtLine Flag is set or not for Lines in range 0 to 31. | |
__STATIC_INLINE uint32_t | LL_EXTI_IsActiveFlag_32_63 (uint32_t ExtiLine) |
Check if the ExtLine Flag is set or not for Lines in range 32 to 63. | |
__STATIC_INLINE uint32_t | LL_EXTI_ReadFlag_0_31 (uint32_t ExtiLine) |
Read ExtLine Combination Flag for Lines in range 0 to 31. | |
__STATIC_INLINE uint32_t | LL_EXTI_ReadFlag_32_63 (uint32_t ExtiLine) |
Read ExtLine Combination Flag for Lines in range 32 to 63. | |
__STATIC_INLINE void | LL_EXTI_ClearFlag_0_31 (uint32_t ExtiLine) |
Clear ExtLine Flags for Lines in range 0 to 31. | |
__STATIC_INLINE void | LL_EXTI_ClearFlag_32_63 (uint32_t ExtiLine) |
Clear ExtLine Flags for Lines in range 32 to 63. |
__STATIC_INLINE void LL_EXTI_ClearFlag_0_31 | ( | uint32_t | ExtiLine | ) |
Clear ExtLine Flags for Lines in range 0 to 31.
ExtiLine | This parameter can be a combination of the following values:
|
None |
Definition at line 1314 of file stm32l4xx_ll_exti.h.
Referenced by HAL_COMP_Init(), and HAL_COMP_IRQHandler().
__STATIC_INLINE void LL_EXTI_ClearFlag_32_63 | ( | uint32_t | ExtiLine | ) |
Clear ExtLine Flags for Lines in range 32 to 63.
ExtiLine | This parameter can be a combination of the following values: |
None |
Definition at line 1331 of file stm32l4xx_ll_exti.h.
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31 | ( | uint32_t | ExtiLine | ) |
Check if the ExtLine Flag is set or not for Lines in range 0 to 31.
ExtiLine | This parameter can be a combination of the following values:
|
State | of bit (1 or 0). |
Definition at line 1201 of file stm32l4xx_ll_exti.h.
Referenced by HAL_COMP_IRQHandler().
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63 | ( | uint32_t | ExtiLine | ) |
Check if the ExtLine Flag is set or not for Lines in range 32 to 63.
ExtiLine | This parameter can be a combination of the following values: |
State | of bit (1 or 0). |
Definition at line 1218 of file stm32l4xx_ll_exti.h.
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31 | ( | uint32_t | ExtiLine | ) |
Read ExtLine Combination Flag for Lines in range 0 to 31.
ExtiLine | This parameter can be a combination of the following values:
|
@note | This bit is set when the selected edge event arrives on the interrupt |
Definition at line 1257 of file stm32l4xx_ll_exti.h.
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63 | ( | uint32_t | ExtiLine | ) |
Read ExtLine Combination Flag for Lines in range 32 to 63.
ExtiLine | This parameter can be a combination of the following values: |
@note | This bit is set when the selected edge event arrives on the interrupt |
Definition at line 1275 of file stm32l4xx_ll_exti.h.