LL_USART_InitTypeDef Struct Reference

LL USART Init Structure definition. More...

#include <stm32f4xx_ll_usart.h>

Data Fields
uint32_t	BaudRate
uint32_t	DataWidth
uint32_t	StopBits
uint32_t	Parity
uint32_t	TransferDirection
uint32_t	HardwareFlowControl
uint32_t	OverSampling

---

Detailed Description

LL USART Init Structure definition.

Definition at line 90 of file stm32f4xx_ll_usart.h.

---

Field Documentation

uint32_t LL_USART_InitTypeDef::BaudRate

This field defines expected Usart communication baud rate.

This feature can be modified afterwards using unitary function LL_USART_SetBaudRate().

Definition at line 92 of file stm32f4xx_ll_usart.h.

Referenced by LL_USART_Init(), and LL_USART_StructInit().

uint32_t LL_USART_InitTypeDef::DataWidth

Specifies the number of data bits transmitted or received in a frame. This parameter can be a value of Datawidth.

This feature can be modified afterwards using unitary function LL_USART_SetDataWidth().

Definition at line 96 of file stm32f4xx_ll_usart.h.

Referenced by LL_USART_Init(), and LL_USART_StructInit().

uint32_t LL_USART_InitTypeDef::HardwareFlowControl

Specifies whether the hardware flow control mode is enabled or disabled. This parameter can be a value of Hardware Control.

This feature can be modified afterwards using unitary function LL_USART_SetHWFlowCtrl().

Definition at line 116 of file stm32f4xx_ll_usart.h.

Referenced by LL_USART_Init(), and LL_USART_StructInit().

uint32_t LL_USART_InitTypeDef::OverSampling

Specifies whether USART oversampling mode is 16 or 8. This parameter can be a value of Oversampling.

This feature can be modified afterwards using unitary function LL_USART_SetOverSampling().

Definition at line 121 of file stm32f4xx_ll_usart.h.

Referenced by LL_USART_Init(), and LL_USART_StructInit().

uint32_t LL_USART_InitTypeDef::Parity

Specifies the parity mode. This parameter can be a value of Parity Control.

This feature can be modified afterwards using unitary function LL_USART_SetParity().

Definition at line 106 of file stm32f4xx_ll_usart.h.

Referenced by LL_USART_Init(), and LL_USART_StructInit().

uint32_t LL_USART_InitTypeDef::StopBits

Specifies the number of stop bits transmitted. This parameter can be a value of Stop Bits.

This feature can be modified afterwards using unitary function LL_USART_SetStopBitsLength().

Definition at line 101 of file stm32f4xx_ll_usart.h.

Referenced by LL_USART_Init(), and LL_USART_StructInit().

uint32_t LL_USART_InitTypeDef::TransferDirection

Specifies whether the Receive and/or Transmit mode is enabled or disabled. This parameter can be a value of Communication Direction.

This feature can be modified afterwards using unitary function LL_USART_SetTransferDirection().

Definition at line 111 of file stm32f4xx_ll_usart.h.

Referenced by LL_USART_Init(), and LL_USART_StructInit().

---

The documentation for this struct was generated from the following file:

• stm32f4xx_ll_usart.h