TIM_BDTRInitTypeDef Struct Reference
[TIM]

BDTR structure definition. More...

#include <stm32f4xx_tim.h>

Data Fields
uint16_t	TIM_OSSRState
uint16_t	TIM_OSSIState
uint16_t	TIM_LOCKLevel
uint16_t	TIM_DeadTime
uint16_t	TIM_Break
uint16_t	TIM_BreakPolarity
uint16_t	TIM_AutomaticOutput

---

Detailed Description

BDTR structure definition.

Note:

This structure is used only with TIM1 and TIM8.

---

Field Documentation

uint16_t TIM_AutomaticOutput

Specifies whether the TIM Automatic Output feature is enabled or not. This parameter can be a value of TIM_AOE_Bit_Set_Reset

uint16_t TIM_Break

Specifies whether the TIM Break input is enabled or not. This parameter can be a value of TIM_Break_Input_enable_disable

uint16_t TIM_BreakPolarity

Specifies the TIM Break Input pin polarity. This parameter can be a value of TIM_Break_Polarity

uint16_t TIM_DeadTime

Specifies the delay time between the switching-off and the switching-on of the outputs. This parameter can be a number between 0x00 and 0xFF

uint16_t TIM_LOCKLevel

Specifies the LOCK level parameters. This parameter can be a value of TIM_Lock_level

uint16_t TIM_OSSIState

Specifies the Off-State used in Idle state. This parameter can be a value of TIM_OSSI_Off_State_Selection_for_Idle_mode_state

uint16_t TIM_OSSRState

Specifies the Off-State selection used in Run mode. This parameter can be a value of TIM_OSSR_Off_State_Selection_for_Run_mode_state

---

The documentation for this struct was generated from the following file:

• Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_tim.h