STM32L486xx HAL User Manual
|
PWR HAL module driver. This file provides firmware functions to manage the following functionalities of the Power Controller (PWR) peripheral: + Initialization/de-initialization functions + Peripheral Control functions. More...
#include "stm32l4xx_hal.h"
Go to the source code of this file.
Defines | |
#define | PVD_MODE_IT ((uint32_t)0x00010000) |
#define | PVD_MODE_EVT ((uint32_t)0x00020000) |
#define | PVD_RISING_EDGE ((uint32_t)0x00000001) |
#define | PVD_FALLING_EDGE ((uint32_t)0x00000002) |
Functions | |
void | HAL_PWR_DeInit (void) |
Deinitialize the HAL PWR peripheral registers to their default reset values. | |
void | HAL_PWR_EnableBkUpAccess (void) |
Enable access to the backup domain (RTC registers, RTC backup data registers). | |
void | HAL_PWR_DisableBkUpAccess (void) |
Disable access to the backup domain (RTC registers, RTC backup data registers). | |
HAL_StatusTypeDef | HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD) |
Configure the voltage threshold detected by the Power Voltage Detector (PVD). | |
void | HAL_PWR_EnablePVD (void) |
Enable the Power Voltage Detector (PVD). | |
void | HAL_PWR_DisablePVD (void) |
Disable the Power Voltage Detector (PVD). | |
void | HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity) |
Enable the WakeUp PINx functionality. | |
void | HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx) |
Disable the WakeUp PINx functionality. | |
void | HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry) |
Enter Sleep or Low-power Sleep mode. | |
void | HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry) |
Enter Stop mode. | |
void | HAL_PWR_EnterSTANDBYMode (void) |
Enter Standby mode. | |
void | HAL_PWR_EnableSleepOnExit (void) |
Indicate Sleep-On-Exit when returning from Handler mode to Thread mode. | |
void | HAL_PWR_DisableSleepOnExit (void) |
Disable Sleep-On-Exit feature when returning from Handler mode to Thread mode. | |
void | HAL_PWR_EnableSEVOnPend (void) |
Enable CORTEX M4 SEVONPEND bit. | |
void | HAL_PWR_DisableSEVOnPend (void) |
Disable CORTEX M4 SEVONPEND bit. | |
__weak void | HAL_PWR_PVDCallback (void) |
PWR PVD interrupt callback. |
PWR HAL module driver. This file provides firmware functions to manage the following functionalities of the Power Controller (PWR) peripheral: + Initialization/de-initialization functions + Peripheral Control functions.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32l4xx_hal_pwr.c.