WWDG Exported Macros

Defines
#define	__HAL_WWDG_ENABLE(__HANDLE__)   SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
	Enable the WWDG peripheral.
#define	__HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__)   SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
	Enable the WWDG early wakeup interrupt.
#define	__HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__)   __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
	Check whether the selected WWDG interrupt has occurred or not.
#define	__HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__)   __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
	Clear the WWDG interrupt pending bits.
#define	__HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__)   (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
	Check whether the specified WWDG flag is set or not.
#define	__HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__)   ((__HANDLE__)->Instance->SR = ~(__FLAG__))
	Clear the WWDG's pending flags.
#define	__HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
	Check whether the specified WWDG interrupt source is enabled or not.

---

Define Documentation

#define __HAL_WWDG_CLEAR_FLAG	(		__HANDLE__,
			__FLAG__
	)		((__HANDLE__)->Instance->SR = ~(__FLAG__))

Clear the WWDG's pending flags.

Parameters:

__HANDLE__	WWDG handle
__FLAG__	specifies the flag to clear. This parameter can be one of the following values: WWDG_FLAG_EWIF: Early wakeup interrupt flag

Return values:

None

Definition at line 245 of file stm32l4xx_hal_wwdg.h.

Referenced by HAL_WWDG_IRQHandler().

#define __HAL_WWDG_CLEAR_IT	(		__HANDLE__,
			__INTERRUPT__
	)		__HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))

Clear the WWDG interrupt pending bits.

bits to clear the selected interrupt pending bits.

Parameters:

__HANDLE__	WWDG handle
__INTERRUPT__	specifies the interrupt pending bit to clear. This parameter can be one of the following values: WWDG_FLAG_EWIF: Early wakeup interrupt flag

Definition at line 225 of file stm32l4xx_hal_wwdg.h.

#define __HAL_WWDG_ENABLE

(

__HANDLE__

)

SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)

Enable the WWDG peripheral.

Parameters:

__HANDLE__

WWDG handle

Return values:

None

Definition at line 195 of file stm32l4xx_hal_wwdg.h.

#define __HAL_WWDG_ENABLE_IT	(		__HANDLE__,
			__INTERRUPT__
	)		SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))

Enable the WWDG early wakeup interrupt.

Parameters:

__HANDLE__,:	WWDG handle
__INTERRUPT__	specifies the interrupt to enable. This parameter can be one of the following values: WWDG_IT_EWI: Early wakeup interrupt

Note:

Once enabled this interrupt cannot be disabled except by a system reset.

Return values:

None

Definition at line 206 of file stm32l4xx_hal_wwdg.h.

#define __HAL_WWDG_GET_FLAG	(		__HANDLE__,
			__FLAG__
	)		(((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))

Check whether the specified WWDG flag is set or not.

Parameters:

__HANDLE__	WWDG handle
__FLAG__	specifies the flag to check. This parameter can be one of the following values: WWDG_FLAG_EWIF: Early wakeup interrupt flag

Return values:

The	new state of WWDG_FLAG (SET or RESET).

Definition at line 235 of file stm32l4xx_hal_wwdg.h.

Referenced by HAL_WWDG_IRQHandler().

#define __HAL_WWDG_GET_IT	(		__HANDLE__,
			__INTERRUPT__
	)		__HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))

Check whether the selected WWDG interrupt has occurred or not.

Parameters:

__HANDLE__	WWDG handle
__INTERRUPT__	specifies the it to check. This parameter can be one of the following values: WWDG_FLAG_EWIF: Early wakeup interrupt IT

Return values:

The	new state of WWDG_FLAG (SET or RESET).

Definition at line 216 of file stm32l4xx_hal_wwdg.h.

#define __HAL_WWDG_GET_IT_SOURCE	(		__HANDLE__,
			__INTERRUPT__
	)		(((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))

Check whether the specified WWDG interrupt source is enabled or not.

Parameters:

__HANDLE__	WWDG Handle.
__INTERRUPT__	specifies the WWDG interrupt source to check. This parameter can be one of the following values: WWDG_IT_EWI: Early Wakeup Interrupt

Return values:

state

of __INTERRUPT__ (TRUE or FALSE).

Definition at line 254 of file stm32l4xx_hal_wwdg.h.

Referenced by HAL_WWDG_IRQHandler().