Injected channels Configuration functions
[ADC_Private_Functions]
Injected channels Configuration functions.
More...
Functions |
| void | ADC_InjectedChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) |
| | Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time.
|
| void | ADC_InjectedSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t Length) |
| | Configures the sequencer length for injected channels.
|
| void | ADC_SetInjectedOffset (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) |
| | Set the injected channels conversion value offset.
|
| void | ADC_ExternalTrigInjectedConvConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv) |
| | Configures the ADCx external trigger for injected channels conversion.
|
| void | ADC_ExternalTrigInjectedConvEdgeConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConvEdge) |
| | Configures the ADCx external trigger edge for injected channels conversion.
|
| void | ADC_SoftwareStartInjectedConv (ADC_TypeDef *ADCx) |
| | Enables the selected ADC software start conversion of the injected channels.
|
| FlagStatus | ADC_GetSoftwareStartInjectedConvCmdStatus (ADC_TypeDef *ADCx) |
| | Gets the selected ADC Software start injected conversion Status.
|
| void | ADC_AutoInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| | Enables or disables the selected ADC automatic injected group conversion after regular one.
|
| void | ADC_InjectedDiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| | Enables or disables the discontinuous mode for injected group channel for the specified ADC.
|
| uint16_t | ADC_GetInjectedConversionValue (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel) |
| | Returns the ADC injected channel conversion result.
|
Detailed Description
Injected channels Configuration functions.
===============================================================================
Injected channels Configuration functions
===============================================================================
This section provide functions allowing to configure the ADC Injected channels,
it is composed of 2 sub sections :
1. Configuration functions for Injected channels: This subsection provides
functions allowing to configure the ADC injected channels :
- Configure the rank in the injected group sequencer for each channel
- Configure the sampling time for each channel
- Activate the Auto injected Mode
- Activate the Discontinuous Mode
- scan mode activation
- External/software trigger source
- External trigger edge
- injected channels sequencer.
2. Get the Specified Injected channel conversion data: This subsection
provides an important function in the ADC peripheral since it returns the
converted data of the specific injected channel.
Function Documentation
| void ADC_AutoInjectedConvCmd |
( |
ADC_TypeDef * |
ADCx, |
|
|
FunctionalState |
NewState | |
|
) |
| | |
Enables or disables the selected ADC automatic injected group conversion after regular one.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| NewState,: | new state of the selected ADC auto injected conversion This parameter can be: ENABLE or DISABLE. |
- Return values:
-
| void ADC_ExternalTrigInjectedConvConfig |
( |
ADC_TypeDef * |
ADCx, |
|
|
uint32_t |
ADC_ExternalTrigInjecConv | |
|
) |
| | |
Configures the ADCx external trigger for injected channels conversion.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| ADC_ExternalTrigInjecConv,: | specifies the ADC trigger to start injected conversion. This parameter can be one of the following values:
- ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected
- ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected
- ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected
- ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected
- ADC_ExternalTrigInjecConv_T3_CC2: Timer3 capture compare2 selected
- ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected
- ADC_ExternalTrigInjecConv_T4_CC1: Timer4 capture compare1 selected
- ADC_ExternalTrigInjecConv_T4_CC2: Timer4 capture compare2 selected
- ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected
- ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected
- ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected
- ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected
- ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected
- ADC_ExternalTrigInjecConv_T8_CC3: Timer8 capture compare3 selected
- ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected
- ADC_ExternalTrigInjecConv_Ext_IT15: External interrupt line 15 event selected
|
- Return values:
-
| void ADC_ExternalTrigInjectedConvEdgeConfig |
( |
ADC_TypeDef * |
ADCx, |
|
|
uint32_t |
ADC_ExternalTrigInjecConvEdge | |
|
) |
| | |
Configures the ADCx external trigger edge for injected channels conversion.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| ADC_ExternalTrigInjecConvEdge,: | specifies the ADC external trigger edge to start injected conversion. This parameter can be one of the following values:
- ADC_ExternalTrigInjecConvEdge_None: external trigger disabled for injected conversion
- ADC_ExternalTrigInjecConvEdge_Rising: detection on rising edge
- ADC_ExternalTrigInjecConvEdge_Falling: detection on falling edge
- ADC_ExternalTrigInjecConvEdge_RisingFalling: detection on both rising and falling edge
|
- Return values:
-
| uint16_t ADC_GetInjectedConversionValue |
( |
ADC_TypeDef * |
ADCx, |
|
|
uint8_t |
ADC_InjectedChannel | |
|
) |
| | |
Returns the ADC injected channel conversion result.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| ADC_InjectedChannel,: | the converted ADC injected channel. This parameter can be one of the following values:
- ADC_InjectedChannel_1: Injected Channel1 selected
- ADC_InjectedChannel_2: Injected Channel2 selected
- ADC_InjectedChannel_3: Injected Channel3 selected
- ADC_InjectedChannel_4: Injected Channel4 selected
|
- Return values:
-
| The | Data conversion value. |
| FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus |
( |
ADC_TypeDef * |
ADCx |
) |
|
Gets the selected ADC Software start injected conversion Status.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
- Return values:
-
| The | new state of ADC software start injected conversion (SET or RESET). |
| void ADC_InjectedChannelConfig |
( |
ADC_TypeDef * |
ADCx, |
|
|
uint8_t |
ADC_Channel, |
|
|
uint8_t |
Rank, |
|
|
uint8_t |
ADC_SampleTime | |
|
) |
| | |
Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| ADC_Channel,: | the ADC channel to configure. This parameter can be one of the following values:
- ADC_Channel_0: ADC Channel0 selected
- ADC_Channel_1: ADC Channel1 selected
- ADC_Channel_2: ADC Channel2 selected
- ADC_Channel_3: ADC Channel3 selected
- ADC_Channel_4: ADC Channel4 selected
- ADC_Channel_5: ADC Channel5 selected
- ADC_Channel_6: ADC Channel6 selected
- ADC_Channel_7: ADC Channel7 selected
- ADC_Channel_8: ADC Channel8 selected
- ADC_Channel_9: ADC Channel9 selected
- ADC_Channel_10: ADC Channel10 selected
- ADC_Channel_11: ADC Channel11 selected
- ADC_Channel_12: ADC Channel12 selected
- ADC_Channel_13: ADC Channel13 selected
- ADC_Channel_14: ADC Channel14 selected
- ADC_Channel_15: ADC Channel15 selected
- ADC_Channel_16: ADC Channel16 selected
- ADC_Channel_17: ADC Channel17 selected
- ADC_Channel_18: ADC Channel18 selected
|
| Rank,: | The rank in the injected group sequencer. This parameter must be between 1 to 4. |
| ADC_SampleTime,: | The sample time value to be set for the selected channel. This parameter can be one of the following values:
- ADC_SampleTime_3Cycles: Sample time equal to 3 cycles
- ADC_SampleTime_15Cycles: Sample time equal to 15 cycles
- ADC_SampleTime_28Cycles: Sample time equal to 28 cycles
- ADC_SampleTime_56Cycles: Sample time equal to 56 cycles
- ADC_SampleTime_84Cycles: Sample time equal to 84 cycles
- ADC_SampleTime_112Cycles: Sample time equal to 112 cycles
- ADC_SampleTime_144Cycles: Sample time equal to 144 cycles
- ADC_SampleTime_480Cycles: Sample time equal to 480 cycles
|
- Return values:
-
| void ADC_InjectedDiscModeCmd |
( |
ADC_TypeDef * |
ADCx, |
|
|
FunctionalState |
NewState | |
|
) |
| | |
Enables or disables the discontinuous mode for injected group channel for the specified ADC.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| NewState,: | new state of the selected ADC discontinuous mode on injected group channel. This parameter can be: ENABLE or DISABLE. |
- Return values:
-
| void ADC_InjectedSequencerLengthConfig |
( |
ADC_TypeDef * |
ADCx, |
|
|
uint8_t |
Length | |
|
) |
| | |
Configures the sequencer length for injected channels.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| Length,: | The sequencer length. This parameter must be a number between 1 to 4. |
- Return values:
-
| void ADC_SetInjectedOffset |
( |
ADC_TypeDef * |
ADCx, |
|
|
uint8_t |
ADC_InjectedChannel, |
|
|
uint16_t |
Offset | |
|
) |
| | |
Set the injected channels conversion value offset.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
| ADC_InjectedChannel,: | the ADC injected channel to set its offset. This parameter can be one of the following values:
- ADC_InjectedChannel_1: Injected Channel1 selected
- ADC_InjectedChannel_2: Injected Channel2 selected
- ADC_InjectedChannel_3: Injected Channel3 selected
- ADC_InjectedChannel_4: Injected Channel4 selected
|
| Offset,: | the offset value for the selected ADC injected channel This parameter must be a 12bit value. |
- Return values:
-
| void ADC_SoftwareStartInjectedConv |
( |
ADC_TypeDef * |
ADCx |
) |
|
Enables the selected ADC software start conversion of the injected channels.
- Parameters:
-
| ADCx,: | where x can be 1, 2 or 3 to select the ADC peripheral. |
- Return values:
-
