Temperature Sensor, Vrefint (Voltage Reference internal)
[ADC_Private_Functions]

Temperature Sensor, Vrefint and VBAT management functions. More...

Functions
void	ADC_TempSensorVrefintCmd (FunctionalState NewState)
	Enables or disables the temperature sensor and Vrefint channels.
void	ADC_VBATCmd (FunctionalState NewState)
	Enables or disables the VBAT (Voltage Battery) channel.

Detailed Description

Temperature Sensor, Vrefint and VBAT management functions.

and VBAT (Voltage BATtery) management functions

 ===============================================================================
               Temperature Sensor, Vrefint and VBAT management functions
 ===============================================================================  

  This section provides functions allowing to enable/ disable the internal 
  connections between the ADC and the Temperature Sensor, the Vrefint and the
  Vbat sources.
     
  A typical configuration to get the Temperature sensor and Vrefint channels 
  voltages is done following these steps :
   1. Enable the internal connection of Temperature sensor and Vrefint sources 
      with the ADC channels using ADC_TempSensorVrefintCmd() function. 
   2. Select the ADC_Channel_TempSensor and/or ADC_Channel_Vrefint using 
      ADC_RegularChannelConfig() or  ADC_InjectedChannelConfig() functions 
   3. Get the voltage values, using ADC_GetConversionValue() or  
      ADC_GetInjectedConversionValue().

  A typical configuration to get the VBAT channel voltage is done following 
  these steps :
   1. Enable the internal connection of VBAT source with the ADC channel using 
      ADC_VBATCmd() function. 
   2. Select the ADC_Channel_Vbat using ADC_RegularChannelConfig() or  
      ADC_InjectedChannelConfig() functions 
   3. Get the voltage value, using ADC_GetConversionValue() or  
      ADC_GetInjectedConversionValue().

Function Documentation

void ADC_TempSensorVrefintCmd ( FunctionalState NewState )

Enables or disables the temperature sensor and Vrefint channels.

Parameters:

NewState,:

new state of the temperature sensor and Vrefint channels. This parameter can be: ENABLE or DISABLE.

Return values:

None

void ADC_VBATCmd ( FunctionalState NewState )

Enables or disables the VBAT (Voltage Battery) channel.