Initialization and Configuration functions
[ADC_Private_Functions]

Initialization and Configuration functions. More...

Functions
void	ADC_DeInit (void)
	Deinitializes all ADCs peripherals registers to their default reset values.
void	ADC_Init (ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct)
	Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct.
void	ADC_StructInit (ADC_InitTypeDef *ADC_InitStruct)
	Fills each ADC_InitStruct member with its default value.
void	ADC_CommonInit (ADC_CommonInitTypeDef *ADC_CommonInitStruct)
	Initializes the ADCs peripherals according to the specified parameters in the ADC_CommonInitStruct.
void	ADC_CommonStructInit (ADC_CommonInitTypeDef *ADC_CommonInitStruct)
	Fills each ADC_CommonInitStruct member with its default value.
void	ADC_Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the specified ADC peripheral.

---

Detailed Description

Initialization and Configuration functions.

 ===============================================================================
                      Initialization and Configuration functions
 ===============================================================================  
  This section provides functions allowing to:
   - Initialize and configure the ADC Prescaler
   - ADC Conversion Resolution (12bit..6bit)
   - Scan Conversion Mode (multichannels or one channel) for regular group
   - ADC Continuous Conversion Mode (Continuous or Single conversion) for 
     regular group
   - External trigger Edge and source of regular group, 
   - Converted data alignment (left or right)
   - The number of ADC conversions that will be done using the sequencer for 
     regular channel group
   - Multi ADC mode selection
   - Direct memory access mode selection for multi ADC mode  
   - Delay between 2 sampling phases (used in dual or triple interleaved modes)
   - Enable or disable the ADC peripheral
   

---

Function Documentation

void ADC_Cmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the specified ADC peripheral.

Parameters:

	ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
	NewState,:	new state of the ADCx peripheral. This parameter can be: ENABLE or DISABLE.

Return values:

None

void ADC_CommonInit

(

ADC_CommonInitTypeDef *

ADC_CommonInitStruct

)

Initializes the ADCs peripherals according to the specified parameters in the ADC_CommonInitStruct.

Parameters:

ADC_CommonInitStruct,:

pointer to an ADC_CommonInitTypeDef structure that contains the configuration information for All ADCs peripherals.

Return values:

None

void ADC_CommonStructInit

(

ADC_CommonInitTypeDef *

ADC_CommonInitStruct

)

Fills each ADC_CommonInitStruct member with its default value.

Parameters:

ADC_CommonInitStruct,:

pointer to an ADC_CommonInitTypeDef structure which will be initialized.

Return values:

None

void ADC_DeInit

(

void

)

Deinitializes all ADCs peripherals registers to their default reset values.

Parameters:

None

Return values:

None

void ADC_Init	(	ADC_TypeDef *	ADCx,
		ADC_InitTypeDef *	ADC_InitStruct
	)

Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct.

Note:

This function is used to configure the global features of the ADC ( Resolution and Data Alignment), however, the rest of the configuration parameters are specific to the regular channels group (scan mode activation, continuous mode activation, External trigger source and edge, number of conversion in the regular channels group sequencer).

Parameters:

	ADCx,:	where x can be 1, 2 or 3 to select the ADC peripheral.
	ADC_InitStruct,:	pointer to an ADC_InitTypeDef structure that contains the configuration information for the specified ADC peripheral.

Return values:

None

void ADC_StructInit

(

ADC_InitTypeDef *

ADC_InitStruct

)

Fills each ADC_InitStruct member with its default value.

Note:

This function is used to initialize the global features of the ADC ( Resolution and Data Alignment), however, the rest of the configuration parameters are specific to the regular channels group (scan mode activation, continuous mode activation, External trigger source and edge, number of conversion in the regular channels group sequencer).

Parameters:

ADC_InitStruct,:

pointer to an ADC_InitTypeDef structure which will be initialized.

Return values:

None