CMSIS-DSP  Verison 1.1.0
CMSIS DSP Software Library
Vector Park Transform

Functions

__STATIC_INLINE void arm_park_f32 (float32_t Ialpha, float32_t Ibeta, float32_t *pId, float32_t *pIq, float32_t sinVal, float32_t cosVal)
 Floating-point Park transform.
__STATIC_INLINE void arm_park_q31 (q31_t Ialpha, q31_t Ibeta, q31_t *pId, q31_t *pIq, q31_t sinVal, q31_t cosVal)
 Park transform for Q31 version.

Description

Forward Park transform converts the input two-coordinate vector to flux and torque components. The Park transform can be used to realize the transformation of the Ialpha and the Ibeta currents from the stationary to the moving reference frame and control the spatial relationship between the stator vector current and rotor flux vector. If we consider the d axis aligned with the rotor flux, the diagram below shows the current vector and the relationship from the two reference frames:

park.gif
Stator current space vector and its component in (a,b) and in the d,q rotating reference frame

The function operates on a single sample of data and each call to the function returns the processed output. The library provides separate functions for Q31 and floating-point data types.

Algorithm
parkFormula.gif
where Ialpha and Ibeta are the stator vector components, pId and pIq are rotor vector components and cosVal and sinVal are the cosine and sine values of theta (rotor flux position).
Fixed-Point Behavior
Care must be taken when using the Q31 version of the Park transform. In particular, the overflow and saturation behavior of the accumulator used must be considered. Refer to the function specific documentation below for usage guidelines.

Function Documentation

__STATIC_INLINE void arm_park_f32 ( float32_t  Ialpha,
float32_t  Ibeta,
float32_t pId,
float32_t pIq,
float32_t  sinVal,
float32_t  cosVal 
)
Parameters:
[in]Ialphainput two-phase vector coordinate alpha
[in]Ibetainput two-phase vector coordinate beta
[out]*pIdpoints to output rotor reference frame d
[out]*pIqpoints to output rotor reference frame q
[in]sinValsine value of rotation angle theta
[in]cosValcosine value of rotation angle theta
Returns:
none.

The function implements the forward Park transform.

__STATIC_INLINE void arm_park_q31 ( q31_t  Ialpha,
q31_t  Ibeta,
q31_t pId,
q31_t pIq,
q31_t  sinVal,
q31_t  cosVal 
)
Parameters:
[in]Ialphainput two-phase vector coordinate alpha
[in]Ibetainput two-phase vector coordinate beta
[out]*pIdpoints to output rotor reference frame d
[out]*pIqpoints to output rotor reference frame q
[in]sinValsine value of rotation angle theta
[in]cosValcosine value of rotation angle theta
Returns:
none.

Scaling and Overflow Behavior:

The function is implemented using an internal 32-bit accumulator. The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. There is saturation on the addition and subtraction, hence there is no risk of overflow.