STM32L486xx HAL User Manual
|
CRC HAL module driver. This file provides firmware functions to manage the following functionalities of the Cyclic Redundancy Check (CRC) peripheral: + Initialization and de-initialization functions + Peripheral Control functions + Peripheral State functions. More...
#include "stm32l4xx_hal.h"
Go to the source code of this file.
Functions | |
static uint32_t | CRC_Handle_8 (CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength) |
Enter 8-bit input data to the CRC calculator. | |
static uint32_t | CRC_Handle_16 (CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength) |
Enter 16-bit input data to the CRC calculator. | |
HAL_StatusTypeDef | HAL_CRC_Init (CRC_HandleTypeDef *hcrc) |
Initialize the CRC according to the specified parameters in the CRC_InitTypeDef and create the associated handle. | |
HAL_StatusTypeDef | HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc) |
DeInitialize the CRC peripheral. | |
__weak void | HAL_CRC_MspInit (CRC_HandleTypeDef *hcrc) |
Initializes the CRC MSP. | |
__weak void | HAL_CRC_MspDeInit (CRC_HandleTypeDef *hcrc) |
DeInitialize the CRC MSP. | |
uint32_t | HAL_CRC_Accumulate (CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) |
Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer starting with the previously computed CRC as initialization value. | |
uint32_t | HAL_CRC_Calculate (CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) |
Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer starting with hcrc->Instance->INIT as initialization value. | |
HAL_CRC_StateTypeDef | HAL_CRC_GetState (CRC_HandleTypeDef *hcrc) |
Return the CRC handle state. |
CRC HAL module driver. This file provides firmware functions to manage the following functionalities of the Cyclic Redundancy Check (CRC) peripheral: + Initialization and de-initialization functions + Peripheral Control functions + Peripheral State functions.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32l4xx_hal_crc.c.