stm32f4xx_hal_pccard.h File Reference

Header file of PCCARD HAL module. More...

#include "stm32f4xx_ll_fmc.h"

Go to the source code of this file.

Data Structures
struct	PCCARD_HandleTypeDef
	FMC_PCCARD handle Structure definition. More...
Defines
#define	__HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__)   ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
	Reset PCCARD handle state.
#define	PCCARD_DEVICE_ADDRESS   0x90000000U
#define	PCCARD_ATTRIBUTE_SPACE_ADDRESS   0x98000000U /* Attribute space size to @0x9BFF FFFF */
#define	PCCARD_COMMON_SPACE_ADDRESS   PCCARD_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
#define	PCCARD_IO_SPACE_ADDRESS   0x9C000000U /* IO space size to @0x9FFF FFFF */
#define	PCCARD_IO_SPACE_PRIMARY_ADDR   0x9C0001F0U /* IO space size to @0x9FFF FFFF */
#define	ATA_DATA   ((uint8_t)0x00) /* Data register */
#define	ATA_SECTOR_COUNT   ((uint8_t)0x02) /* Sector Count register */
#define	ATA_SECTOR_NUMBER   ((uint8_t)0x03) /* Sector Number register */
#define	ATA_CYLINDER_LOW   ((uint8_t)0x04) /* Cylinder low register */
#define	ATA_CYLINDER_HIGH   ((uint8_t)0x05) /* Cylinder high register */
#define	ATA_CARD_HEAD   ((uint8_t)0x06) /* Card/Head register */
#define	ATA_STATUS_CMD   ((uint8_t)0x07) /* Status(read)/Command(write) register */
#define	ATA_STATUS_CMD_ALTERNATE   ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */
#define	ATA_COMMON_DATA_AREA   ((uint16_t)0x0400) /* Start of data area (for Common access only!) */
#define	ATA_CARD_CONFIGURATION   ((uint16_t)0x0202) /* Card Configuration and Status Register */
#define	ATA_READ_SECTOR_CMD   ((uint8_t)0x20)
#define	ATA_WRITE_SECTOR_CMD   ((uint8_t)0x30)
#define	ATA_ERASE_SECTOR_CMD   ((uint8_t)0xC0)
#define	ATA_IDENTIFY_CMD   ((uint8_t)0xEC)
#define	PCCARD_TIMEOUT_ERROR   ((uint8_t)0x60)
#define	PCCARD_BUSY   ((uint8_t)0x80)
#define	PCCARD_PROGR   ((uint8_t)0x01)
#define	PCCARD_READY   ((uint8_t)0x40)
#define	PCCARD_SECTOR_SIZE   255U /* In half words */
#define	HAL_CF_Init   HAL_PCCARD_Init
#define	HAL_CF_DeInit   HAL_PCCARD_DeInit
#define	HAL_CF_MspInit   HAL_PCCARD_MspInit
#define	HAL_CF_MspDeInit   HAL_PCCARD_MspDeInit
#define	HAL_CF_Read_ID   HAL_PCCARD_Read_ID
#define	HAL_CF_Write_Sector   HAL_PCCARD_Write_Sector
#define	HAL_CF_Read_Sector   HAL_PCCARD_Read_Sector
#define	HAL_CF_Erase_Sector   HAL_PCCARD_Erase_Sector
#define	HAL_CF_Reset   HAL_PCCARD_Reset
#define	HAL_CF_IRQHandler   HAL_PCCARD_IRQHandler
#define	HAL_CF_ITCallback   HAL_PCCARD_ITCallback
#define	HAL_CF_GetState   HAL_PCCARD_GetState
#define	HAL_CF_GetStatus   HAL_PCCARD_GetStatus
#define	HAL_CF_ReadStatus   HAL_PCCARD_ReadStatus
#define	HAL_CF_STATUS_SUCCESS   HAL_PCCARD_STATUS_SUCCESS
#define	HAL_CF_STATUS_ONGOING   HAL_PCCARD_STATUS_ONGOING
#define	HAL_CF_STATUS_ERROR   HAL_PCCARD_STATUS_ERROR
#define	HAL_CF_STATUS_TIMEOUT   HAL_PCCARD_STATUS_TIMEOUT
#define	HAL_CF_StatusTypeDef   HAL_PCCARD_StatusTypeDef
#define	CF_DEVICE_ADDRESS   PCCARD_DEVICE_ADDRESS
#define	CF_ATTRIBUTE_SPACE_ADDRESS   PCCARD_ATTRIBUTE_SPACE_ADDRESS
#define	CF_COMMON_SPACE_ADDRESS   PCCARD_COMMON_SPACE_ADDRESS
#define	CF_IO_SPACE_ADDRESS   PCCARD_IO_SPACE_ADDRESS
#define	CF_IO_SPACE_PRIMARY_ADDR   PCCARD_IO_SPACE_PRIMARY_ADDR
#define	CF_TIMEOUT_ERROR   PCCARD_TIMEOUT_ERROR
#define	CF_BUSY   PCCARD_BUSY
#define	CF_PROGR   PCCARD_PROGR
#define	CF_READY   PCCARD_READY
#define	CF_SECTOR_SIZE   PCCARD_SECTOR_SIZE
Enumerations
enum	HAL_PCCARD_StateTypeDef { HAL_PCCARD_STATE_RESET = 0x00U, HAL_PCCARD_STATE_READY = 0x01U, HAL_PCCARD_STATE_BUSY = 0x02U, HAL_PCCARD_STATE_ERROR = 0x04U }
	HAL PCCARD State structures definition. More...
enum	HAL_PCCARD_StatusTypeDef { HAL_PCCARD_STATUS_SUCCESS = 0U, HAL_PCCARD_STATUS_ONGOING, HAL_PCCARD_STATUS_ERROR, HAL_PCCARD_STATUS_TIMEOUT }
Functions
HAL_StatusTypeDef	HAL_PCCARD_Init (PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming)
	Perform the PCCARD memory Initialization sequence.
HAL_StatusTypeDef	HAL_PCCARD_DeInit (PCCARD_HandleTypeDef *hpccard)
	Perform the PCCARD memory De-initialization sequence.
__weak void	HAL_PCCARD_MspInit (PCCARD_HandleTypeDef *hpccard)
	PCCARD MSP Init.
__weak void	HAL_PCCARD_MspDeInit (PCCARD_HandleTypeDef *hpccard)
	PCCARD MSP DeInit.
HAL_StatusTypeDef	HAL_PCCARD_Read_ID (PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus)
	Read Compact Flash's ID.
HAL_StatusTypeDef	HAL_PCCARD_Write_Sector (PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
	Write sector to PCCARD memory.
HAL_StatusTypeDef	HAL_PCCARD_Read_Sector (PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
	Read sector from PCCARD memory.
HAL_StatusTypeDef	HAL_PCCARD_Erase_Sector (PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus)
	Erase sector from PCCARD memory.
HAL_StatusTypeDef	HAL_PCCARD_Reset (PCCARD_HandleTypeDef *hpccard)
	Reset the PCCARD memory.
void	HAL_PCCARD_IRQHandler (PCCARD_HandleTypeDef *hpccard)
	This function handles PCCARD device interrupt request.
__weak void	HAL_PCCARD_ITCallback (PCCARD_HandleTypeDef *hpccard)
	PCCARD interrupt feature callback.
HAL_PCCARD_StateTypeDef	HAL_PCCARD_GetState (PCCARD_HandleTypeDef *hpccard)
	return the PCCARD controller state
HAL_PCCARD_StatusTypeDef	HAL_PCCARD_GetStatus (PCCARD_HandleTypeDef *hpccard)
	Get the compact flash memory status.
HAL_PCCARD_StatusTypeDef	HAL_PCCARD_ReadStatus (PCCARD_HandleTypeDef *hpccard)
	Reads the Compact Flash memory status using the Read status command.

---

Detailed Description

Header file of PCCARD HAL module.

Author:

MCD Application Team

Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f4xx_hal_pccard.h.