STM32F439xx HAL User Manual
|
Header file of DAC HAL module. More...
Go to the source code of this file.
Data Structures | |
struct | DAC_HandleTypeDef |
DAC handle Structure definition. More... | |
struct | DAC_ChannelConfTypeDef |
DAC Configuration regular Channel structure definition. More... | |
Defines | |
#define | HAL_DAC_ERROR_NONE 0x00U |
#define | HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U |
#define | HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U |
#define | HAL_DAC_ERROR_DMA 0x04U |
#define | DAC_TRIGGER_NONE 0x00000000U |
#define | DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) |
#define | DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) |
#define | DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) |
#define | DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) |
#define | DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) |
#define | DAC_TRIGGER_T8_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) |
#define | DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) |
#define | DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) |
#define | DAC_OUTPUTBUFFER_ENABLE 0x00000000U |
#define | DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1) |
#define | DAC_CHANNEL_1 0x00000000U |
#define | DAC_CHANNEL_2 0x00000010U |
#define | DAC_ALIGN_12B_R 0x00000000U |
#define | DAC_ALIGN_12B_L 0x00000004U |
#define | DAC_ALIGN_8B_R 0x00000008U |
#define | DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) |
#define | DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) |
#define | DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) |
#define | DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) |
#define | __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) |
Reset DAC handle state. | |
#define | __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__))) |
Enable the DAC channel. | |
#define | __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__))) |
Disable the DAC channel. | |
#define | __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) |
Enable the DAC interrupt. | |
#define | __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) |
Disable the DAC interrupt. | |
#define | __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__)) |
Checks if the specified DAC interrupt source is enabled or disabled. | |
#define | __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) |
Get the selected DAC's flag status. | |
#define | __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) |
Clear the DAC's flag. | |
#define | IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U) |
#define | IS_DAC_ALIGN(ALIGN) |
#define | IS_DAC_CHANNEL(CHANNEL) |
#define | IS_DAC_OUTPUT_BUFFER_STATE(STATE) |
#define | IS_DAC_TRIGGER(TRIGGER) |
#define | DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008U + (__ALIGNMENT__)) |
Set DHR12R1 alignment. | |
#define | DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014U) + (__ALIGNMENT__)) |
Set DHR12R2 alignment. | |
#define | DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020U + (__ALIGNMENT__)) |
Set DHR12RD alignment. | |
Enumerations | |
enum | HAL_DAC_StateTypeDef { HAL_DAC_STATE_RESET = 0x00U, HAL_DAC_STATE_READY = 0x01U, HAL_DAC_STATE_BUSY = 0x02U, HAL_DAC_STATE_TIMEOUT = 0x03U, HAL_DAC_STATE_ERROR = 0x04U } |
HAL State structures definition. More... | |
Functions | |
HAL_StatusTypeDef | HAL_DAC_Init (DAC_HandleTypeDef *hdac) |
Initializes the DAC peripheral according to the specified parameters in the DAC_InitStruct. | |
HAL_StatusTypeDef | HAL_DAC_DeInit (DAC_HandleTypeDef *hdac) |
Deinitializes the DAC peripheral registers to their default reset values. | |
__weak void | HAL_DAC_MspInit (DAC_HandleTypeDef *hdac) |
Initializes the DAC MSP. | |
__weak void | HAL_DAC_MspDeInit (DAC_HandleTypeDef *hdac) |
DeInitializes the DAC MSP. | |
HAL_StatusTypeDef | HAL_DAC_Start (DAC_HandleTypeDef *hdac, uint32_t Channel) |
Enables DAC and starts conversion of channel. | |
HAL_StatusTypeDef | HAL_DAC_Stop (DAC_HandleTypeDef *hdac, uint32_t Channel) |
Disables DAC and stop conversion of channel. | |
HAL_StatusTypeDef | HAL_DAC_Start_DMA (DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length, uint32_t Alignment) |
Enables DAC and starts conversion of channel. | |
HAL_StatusTypeDef | HAL_DAC_Stop_DMA (DAC_HandleTypeDef *hdac, uint32_t Channel) |
Disables DAC and stop conversion of channel. | |
uint32_t | HAL_DAC_GetValue (DAC_HandleTypeDef *hdac, uint32_t Channel) |
Returns the last data output value of the selected DAC channel. | |
HAL_StatusTypeDef | HAL_DAC_ConfigChannel (DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) |
Configures the selected DAC channel. | |
HAL_StatusTypeDef | HAL_DAC_SetValue (DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data) |
Set the specified data holding register value for DAC channel. | |
HAL_DAC_StateTypeDef | HAL_DAC_GetState (DAC_HandleTypeDef *hdac) |
return the DAC state | |
void | HAL_DAC_IRQHandler (DAC_HandleTypeDef *hdac) |
Handles DAC interrupt request. | |
uint32_t | HAL_DAC_GetError (DAC_HandleTypeDef *hdac) |
Return the DAC error code. | |
void | HAL_DAC_ConvCpltCallbackCh1 (DAC_HandleTypeDef *hdac) |
Conversion complete callback in non blocking mode for Channel1. | |
void | HAL_DAC_ConvHalfCpltCallbackCh1 (DAC_HandleTypeDef *hdac) |
Conversion half DMA transfer callback in non blocking mode for Channel1. | |
void | HAL_DAC_ErrorCallbackCh1 (DAC_HandleTypeDef *hdac) |
Error DAC callback for Channel1. | |
void | HAL_DAC_DMAUnderrunCallbackCh1 (DAC_HandleTypeDef *hdac) |
DMA underrun DAC callback for channel1. |
Header file of DAC HAL module.
Header file of DAC HAL Extension module.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32f4xx_hal_dac.h.