Configuration functions related to LIN feature

Functions
__STATIC_INLINE void	LL_USART_SetLINBrkDetectionLen (USART_TypeDef *USARTx, uint32_t LINBDLength)
	Set LIN Break Detection Length.
__STATIC_INLINE uint32_t	LL_USART_GetLINBrkDetectionLen (USART_TypeDef *USARTx)
	Return LIN Break Detection Length.
__STATIC_INLINE void	LL_USART_EnableLIN (USART_TypeDef *USARTx)
	Enable LIN mode.
__STATIC_INLINE void	LL_USART_DisableLIN (USART_TypeDef *USARTx)
	Disable LIN mode.
__STATIC_INLINE uint32_t	LL_USART_IsEnabledLIN (USART_TypeDef *USARTx)
	Indicate if LIN mode is enabled.

---

Function Documentation

__STATIC_INLINE void LL_USART_DisableLIN

(

USART_TypeDef *

USARTx

)

Disable LIN mode.

Note:

Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not LIN feature is supported by the USARTx instance.

Reference Manual to LL API cross reference:

CR2 LINEN LL_USART_DisableLIN

Parameters:

USARTx

USART Instance

Return values:

None

Definition at line 1443 of file stm32f4xx_ll_usart.h.

__STATIC_INLINE void LL_USART_EnableLIN

(

USART_TypeDef *

USARTx

)

Enable LIN mode.

Note:

Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not LIN feature is supported by the USARTx instance.

Reference Manual to LL API cross reference:

CR2 LINEN LL_USART_EnableLIN

Parameters:

USARTx

USART Instance

Return values:

None

Definition at line 1430 of file stm32f4xx_ll_usart.h.

__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen

(

USART_TypeDef *

USARTx

)

Return LIN Break Detection Length.

Note:

Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not LIN feature is supported by the USARTx instance.

Reference Manual to LL API cross reference:

CR2 LBDL LL_USART_GetLINBrkDetectionLen

Parameters:

USARTx

USART Instance

Return values:

Returned

value can be one of the following values: LL_USART_LINBREAK_DETECT_10B LL_USART_LINBREAK_DETECT_11B

Definition at line 1417 of file stm32f4xx_ll_usart.h.

__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN

(

USART_TypeDef *

USARTx

)

Indicate if LIN mode is enabled.

Note:

Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not LIN feature is supported by the USARTx instance.

Reference Manual to LL API cross reference:

CR2 LINEN LL_USART_IsEnabledLIN

Parameters:

USARTx

USART Instance

Return values:

State

of bit (1 or 0).

Definition at line 1456 of file stm32f4xx_ll_usart.h.

__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen	(	USART_TypeDef *	USARTx,
		uint32_t	LINBDLength
	)

Set LIN Break Detection Length.

Note:

Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not LIN feature is supported by the USARTx instance.

Reference Manual to LL API cross reference:

CR2 LBDL LL_USART_SetLINBrkDetectionLen

Parameters:

USARTx	USART Instance
LINBDLength	This parameter can be one of the following values: LL_USART_LINBREAK_DETECT_10B LL_USART_LINBREAK_DETECT_11B

Return values:

None

Definition at line 1402 of file stm32f4xx_ll_usart.h.