|
STM32F439xx HAL User Manual
|
Timer Complementary One Pulse functions. More...
Functions | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Start (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Starts the TIM One Pulse signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Stop (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Stops the TIM One Pulse signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Start_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Starts the TIM One Pulse signal generation in interrupt mode on the complementary channel. | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Stops the TIM One Pulse signal generation in interrupt mode on the complementary channel. | |
Timer Complementary One Pulse functions.
==============================================================================
##### Timer Complementary One Pulse functions #####
==============================================================================
[..]
This section provides functions allowing to:
(+) Start the Complementary One Pulse generation.
(+) Stop the Complementary One Pulse.
(+) Start the Complementary One Pulse and enable interrupts.
(+) Stop the Complementary One Pulse and disable interrupts.
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start | ( | TIM_HandleTypeDef * | htim, |
| uint32_t | OutputChannel | ||
| ) |
Starts the TIM One Pulse signal generation on the complementary output.
| htim | pointer to a TIM_HandleTypeDef structure that contains the configuration information for TIM module. |
| OutputChannel | TIM Channel to be enabled. This parameter can be one of the following values:
|
| HAL | status |
Definition at line 1301 of file stm32f4xx_hal_tim_ex.c.
References __HAL_TIM_MOE_ENABLE, assert_param, TIM_HandleTypeDef::Instance, TIM_CCxN_ENABLE, and TIM_CCxNChannelCmd().
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT | ( | TIM_HandleTypeDef * | htim, |
| uint32_t | OutputChannel | ||
| ) |
Starts the TIM One Pulse signal generation in interrupt mode on the complementary channel.
| htim | pointer to a TIM_HandleTypeDef structure that contains the configuration information for TIM module. |
| OutputChannel | TIM Channel to be enabled. This parameter can be one of the following values:
|
| HAL | status |
Definition at line 1357 of file stm32f4xx_hal_tim_ex.c.
References __HAL_TIM_ENABLE_IT, __HAL_TIM_MOE_ENABLE, assert_param, TIM_HandleTypeDef::Instance, TIM_CCxN_ENABLE, TIM_CCxNChannelCmd(), TIM_IT_CC1, and TIM_IT_CC2.
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop | ( | TIM_HandleTypeDef * | htim, |
| uint32_t | OutputChannel | ||
| ) |
Stops the TIM One Pulse signal generation on the complementary output.
| htim | pointer to a TIM_HandleTypeDef structure that contains the configuration information for TIM module. |
| OutputChannel | TIM Channel to be disabled. This parameter can be one of the following values:
|
| HAL | status |
Definition at line 1327 of file stm32f4xx_hal_tim_ex.c.
References __HAL_TIM_DISABLE, __HAL_TIM_MOE_DISABLE, assert_param, TIM_HandleTypeDef::Instance, TIM_CCxN_DISABLE, and TIM_CCxNChannelCmd().
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT | ( | TIM_HandleTypeDef * | htim, |
| uint32_t | OutputChannel | ||
| ) |
Stops the TIM One Pulse signal generation in interrupt mode on the complementary channel.
| htim | pointer to a TIM_HandleTypeDef structure that contains the configuration information for TIM module. |
| OutputChannel | TIM Channel to be disabled. This parameter can be one of the following values:
|
| HAL | status |
Definition at line 1389 of file stm32f4xx_hal_tim_ex.c.
References __HAL_TIM_DISABLE, __HAL_TIM_DISABLE_IT, __HAL_TIM_MOE_DISABLE, assert_param, TIM_HandleTypeDef::Instance, TIM_CCxN_DISABLE, TIM_CCxNChannelCmd(), TIM_IT_CC1, and TIM_IT_CC2.
1.7.6.1