Modules
	Time Base functions
	Time Base functions.
	Time Output Compare functions
	Time Output Compare functions.
	Time PWM functions
	Time PWM functions.
	Time Input Capture functions
	Time Input Capture functions.
	Time One Pulse functions
	Time One Pulse functions.
	Time Encoder functions
	Time Encoder functions.
	TIM IRQ handler management
	IRQ handler management.
	Peripheral Control functions
	Peripheral Control functions.
	TIM Callbacks functions
	TIM Callbacks functions.
	Peripheral State functions
	Peripheral State functions.
Functions
void	TIM_Base_SetConfig (TIM_TypeDef TIMx, TIM_Base_InitTypeDef Structure)
	Time Base configuration.
void	TIM_TI1_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI1 as Input.
void	TIM_OC2_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Time Output Compare 2 configuration.
void	TIM_DMADelayPulseCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Delay Pulse complete callback.
void	TIM_DMAError (DMA_HandleTypeDef *hdma)
	TIM DMA error callback.
void	TIM_DMACaptureCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Capture complete callback.
void	TIM_CCxChannelCmd (TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState)
	Enables or disables the TIM Capture Compare Channel x.
static void	TIM_DMAPeriodElapsedCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Period Elapse complete callback.
static void	TIM_DMATriggerCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Trigger callback.
static void	TIM_OC1_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Time Output Compare 1 configuration.
static void	TIM_OC3_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Time Output Compare 3 configuration.
static void	TIM_OC4_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Time Output Compare 4 configuration.
static void	TIM_SlaveTimer_SetConfig (TIM_HandleTypeDef htim, TIM_SlaveConfigTypeDef sSlaveConfig)
	Time Output Compare 4 configuration.
static void	TIM_TI1_ConfigInputStage (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
	Configure the Polarity and Filter for TI1.
static void	TIM_TI2_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI2 as Input.
static void	TIM_TI2_ConfigInputStage (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
	Configure the Polarity and Filter for TI2.
static void	TIM_TI3_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI3 as Input.
static void	TIM_TI4_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI4 as Input.
static void	TIM_ITRx_SetConfig (TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
	Selects the Input Trigger source.
static void	TIM_ETR_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
	Configures the TIMx External Trigger (ETR).

Function Documentation

void TIM_Base_SetConfig	(	TIM_TypeDef *	TIMx,
		TIM_Base_InitTypeDef *	Structure
	)

Time Base configuration.

Parameters:

TIMx	TIM peripheral
Structure	pointer on TIM Time Base required parameters

Return values:

None

Definition at line 4481 of file stm32f4xx_hal_tim.c.

References TIM_Base_InitTypeDef::ClockDivision, TIM_Base_InitTypeDef::CounterMode, TIM_Base_InitTypeDef::Period, TIM_Base_InitTypeDef::Prescaler, and TIM_Base_InitTypeDef::RepetitionCounter.

Referenced by HAL_TIM_Base_Init(), HAL_TIM_Encoder_Init(), HAL_TIM_IC_Init(), HAL_TIM_OC_Init(), HAL_TIM_OnePulse_Init(), HAL_TIM_PWM_Init(), and HAL_TIMEx_HallSensor_Init().

void TIM_CCxChannelCmd	(	TIM_TypeDef *	TIMx,
		uint32_t	Channel,
		uint32_t	ChannelState
	)

Enables or disables the TIM Capture Compare Channel x.

Parameters:

TIMx	to select the TIM peripheral
Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_Channel_1: TIM Channel 1 TIM_Channel_2: TIM Channel 2 TIM_Channel_3: TIM Channel 3 TIM_Channel_4: TIM Channel 4
ChannelState	specifies the TIM Channel CCxE bit new state. This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.

Return values:

None

Definition at line 4739 of file stm32f4xx_hal_tim.c.

References assert_param, and IS_TIM_CHANNELS.

Referenced by HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(), HAL_TIM_Encoder_Stop(), HAL_TIM_Encoder_Stop_DMA(), HAL_TIM_Encoder_Stop_IT(), HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT(), HAL_TIM_IC_Stop(), HAL_TIM_IC_Stop_DMA(), HAL_TIM_IC_Stop_IT(), HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT(), HAL_TIM_OC_Stop(), HAL_TIM_OC_Stop_DMA(), HAL_TIM_OC_Stop_IT(), HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT(), HAL_TIM_OnePulse_Stop(), HAL_TIM_OnePulse_Stop_IT(), HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT(), HAL_TIM_PWM_Stop(), HAL_TIM_PWM_Stop_DMA(), HAL_TIM_PWM_Stop_IT(), HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(), HAL_TIMEx_HallSensor_Stop(), HAL_TIMEx_HallSensor_Stop_DMA(), and HAL_TIMEx_HallSensor_Stop_IT().

void TIM_DMACaptureCplt ( DMA_HandleTypeDef * hdma )

TIM DMA Capture complete callback.

Parameters:

hdma	pointer to a DMA_HandleTypeDef structure that contains the configuration information for the specified DMA module.

Return values:

None

Definition at line 4698 of file stm32f4xx_hal_tim.c.

References TIM_HandleTypeDef::Channel, HAL_TIM_ACTIVE_CHANNEL_1, HAL_TIM_ACTIVE_CHANNEL_2, HAL_TIM_ACTIVE_CHANNEL_3, HAL_TIM_ACTIVE_CHANNEL_4, HAL_TIM_ACTIVE_CHANNEL_CLEARED, HAL_TIM_IC_CaptureCallback(), HAL_TIM_STATE_READY, TIM_HandleTypeDef::hdma, TIM_HandleTypeDef::State, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, TIM_DMA_ID_CC3, and TIM_DMA_ID_CC4.

Referenced by HAL_TIM_DMABurst_ReadStart(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_IC_Start_DMA(), and HAL_TIMEx_HallSensor_Start_DMA().

void TIM_DMADelayPulseCplt ( DMA_HandleTypeDef * hdma )

TIM DMA Delay Pulse complete callback.

Parameters:

hdma	pointer to a DMA_HandleTypeDef structure that contains the configuration information for the specified DMA module.

Return values:

None

Definition at line 4649 of file stm32f4xx_hal_tim.c.

References TIM_HandleTypeDef::Channel, HAL_TIM_ACTIVE_CHANNEL_1, HAL_TIM_ACTIVE_CHANNEL_2, HAL_TIM_ACTIVE_CHANNEL_3, HAL_TIM_ACTIVE_CHANNEL_4, HAL_TIM_ACTIVE_CHANNEL_CLEARED, HAL_TIM_PWM_PulseFinishedCallback(), HAL_TIM_STATE_READY, TIM_HandleTypeDef::hdma, TIM_HandleTypeDef::State, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, TIM_DMA_ID_CC3, and TIM_DMA_ID_CC4.

Referenced by HAL_TIM_DMABurst_WriteStart(), HAL_TIM_OC_Start_DMA(), HAL_TIM_PWM_Start_DMA(), HAL_TIMEx_OCN_Start_DMA(), and HAL_TIMEx_PWMN_Start_DMA().

void TIM_DMAError ( DMA_HandleTypeDef * hdma )

TIM DMA error callback.

Parameters:

hdma	pointer to a DMA_HandleTypeDef structure that contains the configuration information for the specified DMA module.

Return values:

None

Definition at line 4683 of file stm32f4xx_hal_tim.c.

References HAL_TIM_ErrorCallback(), HAL_TIM_STATE_READY, and TIM_HandleTypeDef::State.

Referenced by HAL_TIM_Base_Start_DMA(), HAL_TIM_DMABurst_ReadStart(), HAL_TIM_DMABurst_WriteStart(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_IC_Start_DMA(), HAL_TIM_OC_Start_DMA(), HAL_TIM_PWM_Start_DMA(), HAL_TIMEx_ConfigCommutationEvent_DMA(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_OCN_Start_DMA(), and HAL_TIMEx_PWMN_Start_DMA().

static void TIM_DMAPeriodElapsedCplt ( DMA_HandleTypeDef * hdma ) [static]

TIM DMA Period Elapse complete callback.

Parameters:

hdma	pointer to a DMA_HandleTypeDef structure that contains the configuration information for the specified DMA module.

Return values:

None

Definition at line 4762 of file stm32f4xx_hal_tim.c.

References HAL_TIM_PeriodElapsedCallback(), HAL_TIM_STATE_READY, and TIM_HandleTypeDef::State.

Referenced by HAL_TIM_Base_Start_DMA(), HAL_TIM_DMABurst_ReadStart(), and HAL_TIM_DMABurst_WriteStart().

static void TIM_DMATriggerCplt ( DMA_HandleTypeDef * hdma ) [static]

TIM DMA Trigger callback.

Parameters:

hdma	pointer to a DMA_HandleTypeDef structure that contains the configuration information for the specified DMA module.

Return values:

None

Definition at line 4777 of file stm32f4xx_hal_tim.c.

References HAL_TIM_STATE_READY, HAL_TIM_TriggerCallback(), and TIM_HandleTypeDef::State.

Referenced by HAL_TIM_DMABurst_ReadStart(), and HAL_TIM_DMABurst_WriteStart().

static void TIM_ETR_SetConfig	(	TIM_TypeDef *	TIMx,
		uint32_t	TIM_ExtTRGPrescaler,
		uint32_t	TIM_ExtTRGPolarity,
		uint32_t	ExtTRGFilter
	)		`[static]`

Configures the TIMx External Trigger (ETR).

Parameters:

TIMx	to select the TIM peripheral
TIM_ExtTRGPrescaler	The external Trigger Prescaler. This parameter can be one of the following values: TIM_ETRPRESCALER_DIV1 : ETRP Prescaler OFF. TIM_ETRPRESCALER_DIV2 : ETRP frequency divided by 2. TIM_ETRPRESCALER_DIV4 : ETRP frequency divided by 4. TIM_ETRPRESCALER_DIV8 : ETRP frequency divided by 8.
TIM_ExtTRGPolarity	The external Trigger Polarity. This parameter can be one of the following values: TIM_ETRPOLARITY_INVERTED : active low or falling edge active. TIM_ETRPOLARITY_NONINVERTED : active high or rising edge active.
ExtTRGFilter	External Trigger Filter. This parameter must be a value between 0x00 and 0x0F

Return values:

None

Definition at line 5368 of file stm32f4xx_hal_tim.c.

Referenced by HAL_TIM_ConfigClockSource(), HAL_TIM_ConfigOCrefClear(), and TIM_SlaveTimer_SetConfig().

static void TIM_ITRx_SetConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_ITRx
	)		`[static]`

Selects the Input Trigger source.

Parameters:

TIMx	to select the TIM peripheral
TIM_ITRx	The Input Trigger source. This parameter can be one of the following values: TIM_TS_ITR0: Internal Trigger 0 TIM_TS_ITR1: Internal Trigger 1 TIM_TS_ITR2: Internal Trigger 2 TIM_TS_ITR3: Internal Trigger 3 TIM_TS_TI1F_ED: TI1 Edge Detector TIM_TS_TI1FP1: Filtered Timer Input 1 TIM_TS_TI2FP2: Filtered Timer Input 2 TIM_TS_ETRF: External Trigger input

Return values:

None

Definition at line 5337 of file stm32f4xx_hal_tim.c.

References TIM_SLAVEMODE_EXTERNAL1.

Referenced by HAL_TIM_ConfigClockSource().

static void TIM_OC1_SetConfig	(	TIM_TypeDef *	TIMx,
		TIM_OC_InitTypeDef *	OC_Config
	)		`[static]`

Time Output Compare 1 configuration.

Parameters:

TIMx	to select the TIM peripheral
OC_Config	The output configuration structure

Return values:

None

Definition at line 4792 of file stm32f4xx_hal_tim.c.

References TIM_OC_InitTypeDef::OCIdleState, TIM_OC_InitTypeDef::OCMode, TIM_OC_InitTypeDef::OCNIdleState, TIM_OC_InitTypeDef::OCNPolarity, TIM_OC_InitTypeDef::OCPolarity, and TIM_OC_InitTypeDef::Pulse.

Referenced by HAL_TIM_OC_ConfigChannel(), HAL_TIM_OnePulse_ConfigChannel(), and HAL_TIM_PWM_ConfigChannel().

void TIM_OC2_SetConfig	(	TIM_TypeDef *	TIMx,
		TIM_OC_InitTypeDef *	OC_Config
	)

Time Output Compare 2 configuration.

Parameters:

TIMx	to select the TIM peripheral
OC_Config	The output configuration structure

Return values:

None

Definition at line 4582 of file stm32f4xx_hal_tim.c.

References assert_param, IS_TIM_OCN_POLARITY, TIM_OC_InitTypeDef::OCIdleState, TIM_OC_InitTypeDef::OCMode, TIM_OC_InitTypeDef::OCNIdleState, TIM_OC_InitTypeDef::OCNPolarity, TIM_OC_InitTypeDef::OCPolarity, and TIM_OC_InitTypeDef::Pulse.

Referenced by HAL_TIM_OC_ConfigChannel(), HAL_TIM_OnePulse_ConfigChannel(), HAL_TIM_PWM_ConfigChannel(), and HAL_TIMEx_HallSensor_Init().

static void TIM_OC3_SetConfig	(	TIM_TypeDef *	TIMx,
		TIM_OC_InitTypeDef *	OC_Config
	)		`[static]`

Time Output Compare 3 configuration.

Parameters:

TIMx	to select the TIM peripheral
OC_Config	The output configuration structure

Return values:

None

Definition at line 4857 of file stm32f4xx_hal_tim.c.

References assert_param, IS_TIM_OCIDLE_STATE, IS_TIM_OCN_POLARITY, IS_TIM_OCNIDLE_STATE, TIM_OC_InitTypeDef::OCIdleState, TIM_OC_InitTypeDef::OCMode, TIM_OC_InitTypeDef::OCNIdleState, TIM_OC_InitTypeDef::OCNPolarity, TIM_OC_InitTypeDef::OCPolarity, and TIM_OC_InitTypeDef::Pulse.

Referenced by HAL_TIM_OC_ConfigChannel(), and HAL_TIM_PWM_ConfigChannel().

static void TIM_OC4_SetConfig	(	TIM_TypeDef *	TIMx,
		TIM_OC_InitTypeDef *	OC_Config
	)		`[static]`

Time Output Compare 4 configuration.

Parameters:

TIMx	to select the TIM peripheral
OC_Config	The output configuration structure

Return values:

None

Definition at line 4925 of file stm32f4xx_hal_tim.c.

References assert_param, IS_TIM_OCIDLE_STATE, TIM_OC_InitTypeDef::OCIdleState, TIM_OC_InitTypeDef::OCMode, TIM_OC_InitTypeDef::OCPolarity, and TIM_OC_InitTypeDef::Pulse.

Referenced by HAL_TIM_OC_ConfigChannel(), and HAL_TIM_PWM_ConfigChannel().

static void TIM_SlaveTimer_SetConfig	(	TIM_HandleTypeDef *	htim,
		TIM_SlaveConfigTypeDef *	sSlaveConfig
	)		`[static]`

Time Output Compare 4 configuration.

Parameters:

htim	pointer to a TIM_HandleTypeDef structure that contains the configuration information for TIM module.
sSlaveConfig	The slave configuration structure

Return values:

None

Definition at line 4983 of file stm32f4xx_hal_tim.c.

References assert_param, TIM_SlaveConfigTypeDef::InputTrigger, TIM_HandleTypeDef::Instance, IS_TIM_TRIGGERFILTER, IS_TIM_TRIGGERPOLARITY, IS_TIM_TRIGGERPRESCALER, TIM_SlaveConfigTypeDef::SlaveMode, TIM_ETR_SetConfig(), TIM_TI1_ConfigInputStage(), TIM_TI2_ConfigInputStage(), TIM_TS_ETRF, TIM_TS_ITR0, TIM_TS_ITR1, TIM_TS_ITR2, TIM_TS_ITR3, TIM_TS_TI1F_ED, TIM_TS_TI1FP1, TIM_TS_TI2FP2, TIM_SlaveConfigTypeDef::TriggerFilter, TIM_SlaveConfigTypeDef::TriggerPolarity, and TIM_SlaveConfigTypeDef::TriggerPrescaler.

Referenced by HAL_TIM_SlaveConfigSynchronization(), and HAL_TIM_SlaveConfigSynchronization_IT().

static void TIM_TI1_ConfigInputStage	(	TIM_TypeDef *	TIMx,
		uint32_t	TIM_ICPolarity,
		uint32_t	TIM_ICFilter
	)		`[static]`

Configure the Polarity and Filter for TI1.

Parameters:

TIMx	to select the TIM peripheral.
TIM_ICPolarity	The Input Polarity. This parameter can be one of the following values: TIM_ICPolarity_Rising TIM_ICPolarity_Falling TIM_ICPolarity_BothEdge
TIM_ICFilter	Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.

Return values:

None

Definition at line 5120 of file stm32f4xx_hal_tim.c.

Referenced by HAL_TIM_ConfigClockSource(), and TIM_SlaveTimer_SetConfig().

void TIM_TI1_SetConfig	(	TIM_TypeDef *	TIMx,
		uint32_t	TIM_ICPolarity,
		uint32_t	TIM_ICSelection,
		uint32_t	TIM_ICFilter
	)

Configure the TI1 as Input.

Parameters:

TIMx	to select the TIM peripheral.
TIM_ICPolarity	The Input Polarity. This parameter can be one of the following values: TIM_ICPolarity_Rising TIM_ICPolarity_Falling TIM_ICPolarity_BothEdge
TIM_ICSelection	specifies the input to be used. This parameter can be one of the following values: TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
TIM_ICFilter	Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.

Note:: TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 (on channel2 path) is used as the input signal. Therefore CCMR1 must be protected against un-initialized filter and polarity values.

Return values:

None

Definition at line 4540 of file stm32f4xx_hal_tim.c.

Referenced by HAL_TIM_IC_ConfigChannel(), HAL_TIM_OnePulse_ConfigChannel(), and HAL_TIMEx_HallSensor_Init().

static void TIM_TI2_ConfigInputStage	(	TIM_TypeDef *	TIMx,
		uint32_t	TIM_ICPolarity,
		uint32_t	TIM_ICFilter
	)		`[static]`

Configure the Polarity and Filter for TI2.

Parameters:

TIMx	to select the TIM peripheral.
TIM_ICPolarity	The Input Polarity. This parameter can be one of the following values: TIM_ICPolarity_Rising TIM_ICPolarity_Falling TIM_ICPolarity_BothEdge
TIM_ICFilter	Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.

Return values:

None

Definition at line 5203 of file stm32f4xx_hal_tim.c.

Referenced by HAL_TIM_ConfigClockSource(), and TIM_SlaveTimer_SetConfig().

static void TIM_TI2_SetConfig	(	TIM_TypeDef *	TIMx,
		uint32_t	TIM_ICPolarity,
		uint32_t	TIM_ICSelection,
		uint32_t	TIM_ICFilter
	)		`[static]`

Configure the TI2 as Input.

Parameters:

TIMx	to select the TIM peripheral
TIM_ICPolarity	The Input Polarity. This parameter can be one of the following values: TIM_ICPolarity_Rising TIM_ICPolarity_Falling TIM_ICPolarity_BothEdge
TIM_ICSelection	specifies the input to be used. This parameter can be one of the following values: TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
TIM_ICFilter	Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.

Note:: TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 (on channel1 path) is used as the input signal. Therefore CCMR1 must be protected against un-initialized filter and polarity values.

Return values:

None

Definition at line 5163 of file stm32f4xx_hal_tim.c.

Referenced by HAL_TIM_IC_ConfigChannel(), and HAL_TIM_OnePulse_ConfigChannel().

static void TIM_TI3_SetConfig	(	TIM_TypeDef *	TIMx,
		uint32_t	TIM_ICPolarity,
		uint32_t	TIM_ICSelection,
		uint32_t	TIM_ICFilter
	)		`[static]`

Configure the TI3 as Input.

Parameters:

TIMx	to select the TIM peripheral
TIM_ICPolarity	The Input Polarity. This parameter can be one of the following values: TIM_ICPolarity_Rising TIM_ICPolarity_Falling TIM_ICPolarity_BothEdge
TIM_ICSelection	specifies the input to be used. This parameter can be one of the following values: TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
TIM_ICFilter	Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.

Note:: TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 (on channel4 path) is used as the input signal. Therefore CCMR2 must be protected against un-initialized filter and polarity values.

Return values:

None

Definition at line 5246 of file stm32f4xx_hal_tim.c.

Referenced by HAL_TIM_IC_ConfigChannel().

static void TIM_TI4_SetConfig	(	TIM_TypeDef *	TIMx,
		uint32_t	TIM_ICPolarity,
		uint32_t	TIM_ICSelection,
		uint32_t	TIM_ICFilter
	)		`[static]`

Configure the TI4 as Input.

Parameters:

TIMx	to select the TIM peripheral
TIM_ICPolarity	The Input Polarity. This parameter can be one of the following values: TIM_ICPolarity_Rising TIM_ICPolarity_Falling TIM_ICPolarity_BothEdge
TIM_ICSelection	specifies the input to be used. This parameter can be one of the following values: TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
TIM_ICFilter	Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.

Note:: TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 (on channel3 path) is used as the input signal. Therefore CCMR2 must be protected against un-initialized filter and polarity values.

Return values:

None

Definition at line 5294 of file stm32f4xx_hal_tim.c.

Referenced by HAL_TIM_IC_ConfigChannel().

Modules

Functions

Function Documentation