Functions
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_RXNE (SPI_TypeDef *SPIx)
	Check if Rx buffer is not empty.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_TXE (SPI_TypeDef *SPIx)
	Check if Tx buffer is empty.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_CRCERR (SPI_TypeDef *SPIx)
	Get CRC error flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_MODF (SPI_TypeDef *SPIx)
	Get mode fault error flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_OVR (SPI_TypeDef *SPIx)
	Get overrun error flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_BSY (SPI_TypeDef *SPIx)
	Get busy flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_FRE (SPI_TypeDef *SPIx)
	Get frame format error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_CRCERR (SPI_TypeDef *SPIx)
	Clear CRC error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_MODF (SPI_TypeDef *SPIx)
	Clear mode fault error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_OVR (SPI_TypeDef *SPIx)
	Clear overrun error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_FRE (SPI_TypeDef *SPIx)
	Clear frame format error flag.

Function Documentation

__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR ( SPI_TypeDef * SPIx )

Clear CRC error flag.

Reference Manual to LL API cross reference:: SR CRCERR LL_SPI_ClearFlag_CRCERR

Parameters:

SPIx	SPI Instance

Return values:

None

Definition at line 832 of file stm32f4xx_ll_spi.h.

__STATIC_INLINE void LL_SPI_ClearFlag_FRE ( SPI_TypeDef * SPIx )

Clear frame format error flag.

Note:: Clearing this flag is done by reading SPIx_SR register

Reference Manual to LL API cross reference:: SR FRE LL_SPI_ClearFlag_FRE

Parameters:

SPIx	SPI Instance

Return values:

None

Definition at line 878 of file stm32f4xx_ll_spi.h.

Referenced by LL_I2S_ClearFlag_FRE().

__STATIC_INLINE void LL_SPI_ClearFlag_MODF ( SPI_TypeDef * SPIx )

Clear mode fault error flag.

Note:: Clearing this flag is done by a read access to the SPIx_SR register followed by a write access to the SPIx_CR1 register

Reference Manual to LL API cross reference:: SR MODF LL_SPI_ClearFlag_MODF

Parameters:

SPIx	SPI Instance

Return values:

None

Definition at line 845 of file stm32f4xx_ll_spi.h.

__STATIC_INLINE void LL_SPI_ClearFlag_OVR ( SPI_TypeDef * SPIx )

Clear overrun error flag.

Note:: Clearing this flag is done by a read access to the SPIx_DR register followed by a read access to the SPIx_SR register

Reference Manual to LL API cross reference:: SR OVR LL_SPI_ClearFlag_OVR

Parameters:

SPIx	SPI Instance

Return values:

None

Definition at line 862 of file stm32f4xx_ll_spi.h.

Referenced by LL_I2S_ClearFlag_OVR().

__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY ( SPI_TypeDef * SPIx )

Get busy flag.

Note:: The BSY flag is cleared under any one of the following conditions: -When the SPI is correctly disabled -When a fault is detected in Master mode (MODF bit set to 1) -In Master mode, when it finishes a data transmission and no new data is ready to be sent -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between each data transfer.

Reference Manual to LL API cross reference:: SR BSY LL_SPI_IsActiveFlag_BSY

Parameters:

SPIx	SPI Instance

Return values:

State of bit (1 or 0).

Definition at line 810 of file stm32f4xx_ll_spi.h.

Referenced by LL_I2S_IsActiveFlag_BSY().

__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR ( SPI_TypeDef * SPIx )

Get CRC error flag.

Reference Manual to LL API cross reference:: SR CRCERR LL_SPI_IsActiveFlag_CRCERR

Parameters:

SPIx	SPI Instance

Return values:

State of bit (1 or 0).

Definition at line 770 of file stm32f4xx_ll_spi.h.

__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE ( SPI_TypeDef * SPIx )

Get frame format error flag.

Reference Manual to LL API cross reference:: SR FRE LL_SPI_IsActiveFlag_FRE

Parameters:

SPIx	SPI Instance

Return values:

State of bit (1 or 0).

Definition at line 821 of file stm32f4xx_ll_spi.h.

Referenced by LL_I2S_IsActiveFlag_FRE().

__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF ( SPI_TypeDef * SPIx )

Get mode fault error flag.

Reference Manual to LL API cross reference:: SR MODF LL_SPI_IsActiveFlag_MODF

Parameters:

SPIx	SPI Instance

Return values:

State of bit (1 or 0).

Definition at line 781 of file stm32f4xx_ll_spi.h.

__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR ( SPI_TypeDef * SPIx )

Get overrun error flag.

Reference Manual to LL API cross reference:: SR OVR LL_SPI_IsActiveFlag_OVR

Parameters:

SPIx	SPI Instance

Return values:

State of bit (1 or 0).

Definition at line 792 of file stm32f4xx_ll_spi.h.

Referenced by LL_I2S_IsActiveFlag_OVR().

__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE ( SPI_TypeDef * SPIx )

Check if Rx buffer is not empty.

Reference Manual to LL API cross reference:: SR RXNE LL_SPI_IsActiveFlag_RXNE

Parameters:

SPIx	SPI Instance

Return values:

State of bit (1 or 0).

Definition at line 748 of file stm32f4xx_ll_spi.h.

Referenced by LL_I2S_IsActiveFlag_RXNE().

__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE ( SPI_TypeDef * SPIx )

Check if Tx buffer is empty.

Reference Manual to LL API cross reference:: SR TXE LL_SPI_IsActiveFlag_TXE

Parameters:

SPIx	SPI Instance

Return values:

State of bit (1 or 0).

Definition at line 759 of file stm32f4xx_ll_spi.h.

Referenced by LL_I2S_IsActiveFlag_TXE().

Functions

Function Documentation