Src Directory Reference

Files
file	stm32f4xx_hal.c [code]
	HAL module driver. This is the common part of the HAL initialization.
file	stm32f4xx_hal_adc.c [code]
	This file provides firmware functions to manage the following functionalities of the Analog to Digital Convertor (ADC) peripheral: + Initialization and de-initialization functions + IO operation functions + State and errors functions.
file	stm32f4xx_hal_adc_ex.c [code]
	This file provides firmware functions to manage the following functionalities of the ADC extension peripheral: + Extended features functions.
file	stm32f4xx_hal_can.c [code]
	CAN HAL module driver. This file provides firmware functions to manage the following functionalities of the Controller Area Network (CAN) peripheral: + Initialization and de-initialization functions + Configuration functions + Control functions + Interrupts management + Callbacks functions + Peripheral State and Error functions.
file	stm32f4xx_hal_cec.c [code]
	CEC HAL module driver. This file provides firmware functions to manage the following functionalities of the High Definition Multimedia Interface Consumer Electronics Control Peripheral (CEC). + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions.
file	stm32f4xx_hal_cortex.c [code]
	CORTEX HAL module driver. This file provides firmware functions to manage the following functionalities of the CORTEX: + Initialization and de-initialization functions + Peripheral Control functions.
file	stm32f4xx_hal_crc.c [code]
	CRC HAL module driver. This file provides firmware functions to manage the following functionalities of the Cyclic Redundancy Check (CRC) peripheral: + Initialization and de-initialization functions + Peripheral Control functions + Peripheral State functions.
file	stm32f4xx_hal_cryp.c [code]
	CRYP HAL module driver. This file provides firmware functions to manage the following functionalities of the Cryptography (CRYP) peripheral: + Initialization and de-initialization functions + AES processing functions + DES processing functions + TDES processing functions + DMA callback functions + CRYP IRQ handler management + Peripheral State functions.
file	stm32f4xx_hal_cryp_ex.c [code]
	Extended CRYP HAL module driver This file provides firmware functions to manage the following functionalities of CRYP extension peripheral: + Extended AES processing functions.
file	stm32f4xx_hal_dac.c [code]
	DAC HAL module driver. This file provides firmware functions to manage the following functionalities of the Digital to Analog Converter (DAC) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_dac_ex.c [code]
	DAC HAL module driver. This file provides firmware functions to manage the following functionalities of DAC extension peripheral: + Extended features functions.
file	stm32f4xx_hal_dcmi.c [code]
	DCMI HAL module driver This file provides firmware functions to manage the following functionalities of the Digital Camera Interface (DCMI) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Error functions.
file	stm32f4xx_hal_dcmi_ex.c [code]
	DCMI Extension HAL module driver This file provides firmware functions to manage the following functionalities of DCMI extension peripheral: + Extension features functions.
file	stm32f4xx_hal_dfsdm.c [code]
	This file provides firmware functions to manage the following functionalities of the Digital Filter for Sigma-Delta Modulators (DFSDM) peripherals: + Initialization and configuration of channels and filters + Regular channels configuration + Injected channels configuration + Regular/Injected Channels DMA Configuration + Interrupts and flags management + Analog watchdog feature + Short-circuit detector feature + Extremes detector feature + Clock absence detector feature + Break generation on analog watchdog or short-circuit event.
file	stm32f4xx_hal_dma.c [code]
	DMA HAL module driver.
file	stm32f4xx_hal_dma2d.c [code]
	DMA2D HAL module driver. This file provides firmware functions to manage the following functionalities of the DMA2D peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_dma_ex.c [code]
	DMA Extension HAL module driver This file provides firmware functions to manage the following functionalities of the DMA Extension peripheral: + Extended features functions.
file	stm32f4xx_hal_dsi.c [code]
	DSI HAL module driver. This file provides firmware functions to manage the following functionalities of the DSI peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_eth.c [code]
	ETH HAL module driver. This file provides firmware functions to manage the following functionalities of the Ethernet (ETH) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_flash.c [code]
	FLASH HAL module driver. This file provides firmware functions to manage the following functionalities of the internal FLASH memory: + Program operations functions + Memory Control functions + Peripheral Errors functions.
file	stm32f4xx_hal_flash_ex.c [code]
	Extended FLASH HAL module driver. This file provides firmware functions to manage the following functionalities of the FLASH extension peripheral: + Extended programming operations functions.
file	stm32f4xx_hal_flash_ramfunc.c [code]
	FLASH RAMFUNC module driver. This file provides a FLASH firmware functions which should be executed from internal SRAM + Stop/Start the flash interface while System Run + Enable/Disable the flash sleep while System Run.
file	stm32f4xx_hal_fmpi2c.c [code]
	FMPI2C HAL module driver. This file provides firmware functions to manage the following functionalities of the Inter Integrated Circuit (FMPI2C) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_fmpi2c_ex.c [code]
	FMPI2C Extended HAL module driver. This file provides firmware functions to manage the following functionalities of FMPI2C Extended peripheral: + Extended features functions.
file	stm32f4xx_hal_gpio.c [code]
	GPIO HAL module driver. This file provides firmware functions to manage the following functionalities of the General Purpose Input/Output (GPIO) peripheral: + Initialization and de-initialization functions + IO operation functions.
file	stm32f4xx_hal_hash.c [code]
	HASH HAL module driver. This file provides firmware functions to manage the following functionalities of the HASH peripheral: + Initialization and de-initialization functions + HASH/HMAC Processing functions by algorithm using polling mode + HASH/HMAC functions by algorithm using interrupt mode + HASH/HMAC functions by algorithm using DMA mode + Peripheral State functions.
file	stm32f4xx_hal_hash_ex.c [code]
	HASH HAL Extension module driver. This file provides firmware functions to manage the following functionalities of HASH peripheral: + Extended HASH processing functions based on SHA224 Algorithm + Extended HASH processing functions based on SHA256 Algorithm.
file	stm32f4xx_hal_hcd.c [code]
	HCD HAL module driver. This file provides firmware functions to manage the following functionalities of the USB Peripheral Controller: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State functions.
file	stm32f4xx_hal_i2c.c [code]
	I2C HAL module driver. This file provides firmware functions to manage the following functionalities of the Inter Integrated Circuit (I2C) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral State, Mode and Error functions.
file	stm32f4xx_hal_i2c_ex.c [code]
	I2C Extension HAL module driver. This file provides firmware functions to manage the following functionalities of I2C extension peripheral: + Extension features functions.
file	stm32f4xx_hal_i2s.c [code]
	I2S HAL module driver. This file provides firmware functions to manage the following functionalities of the Integrated Interchip Sound (I2S) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_i2s_ex.c [code]
	I2S HAL module driver. This file provides firmware functions to manage the following functionalities of I2S extension peripheral: + Extension features Functions.
file	stm32f4xx_hal_irda.c [code]
	IRDA HAL module driver. This file provides firmware functions to manage the following functionalities of the IrDA SIR ENDEC block (IrDA): + Initialization and de-initialization methods + IO operation methods + Peripheral Control methods.
file	stm32f4xx_hal_iwdg.c [code]
	IWDG HAL module driver. This file provides firmware functions to manage the following functionalities of the Independent Watchdog (IWDG) peripheral: + Initialization and Start functions + IO operation functions.
file	stm32f4xx_hal_lptim.c [code]
	LPTIM HAL module driver. This file provides firmware functions to manage the following functionalities of the Low Power Timer (LPTIM) peripheral: + Initialization and de-initialization functions. + Start/Stop operation functions in polling mode. + Start/Stop operation functions in interrupt mode. + Reading operation functions. + Peripheral State functions.
file	stm32f4xx_hal_ltdc.c [code]
	LTDC HAL module driver. This file provides firmware functions to manage the following functionalities of the LTDC peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_ltdc_ex.c [code]
	LTDC Extension HAL module driver.
file	stm32f4xx_hal_mmc.c [code]
	MMC card HAL module driver. This file provides firmware functions to manage the following functionalities of the Secure Digital (MMC) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + MMC card Control functions.
file	stm32f4xx_hal_nand.c [code]
	NAND HAL module driver. This file provides a generic firmware to drive NAND memories mounted as external device.
file	stm32f4xx_hal_nor.c [code]
	NOR HAL module driver. This file provides a generic firmware to drive NOR memories mounted as external device.
file	stm32f4xx_hal_pccard.c [code]
	PCCARD HAL module driver. This file provides a generic firmware to drive PCCARD memories mounted as external device.
file	stm32f4xx_hal_pcd.c [code]
	PCD HAL module driver. This file provides firmware functions to manage the following functionalities of the USB Peripheral Controller: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State functions.
file	stm32f4xx_hal_pcd_ex.c [code]
	PCD HAL module driver. This file provides firmware functions to manage the following functionalities of the USB Peripheral Controller: + Extended features functions.
file	stm32f4xx_hal_pwr.c [code]
	PWR HAL module driver. This file provides firmware functions to manage the following functionalities of the Power Controller (PWR) peripheral: + Initialization and de-initialization functions + Peripheral Control functions.
file	stm32f4xx_hal_pwr_ex.c [code]
	Extended PWR HAL module driver. This file provides firmware functions to manage the following functionalities of PWR extension peripheral: + Peripheral Extended features functions.
file	stm32f4xx_hal_qspi.c [code]
	QSPI HAL module driver. This file provides firmware functions to manage the following functionalities of the QuadSPI interface (QSPI). + Initialization and de-initialization functions + Indirect functional mode management + Memory-mapped functional mode management + Auto-polling functional mode management + Interrupts and flags management + DMA channel configuration for indirect functional mode + Errors management and abort functionality.
file	stm32f4xx_hal_rcc.c [code]
	RCC HAL module driver. This file provides firmware functions to manage the following functionalities of the Reset and Clock Control (RCC) peripheral: + Initialization and de-initialization functions + Peripheral Control functions.
file	stm32f4xx_hal_rcc_ex.c [code]
	Extension RCC HAL module driver. This file provides firmware functions to manage the following functionalities RCC extension peripheral: + Extended Peripheral Control functions.
file	stm32f4xx_hal_rng.c [code]
	RNG HAL module driver. This file provides firmware functions to manage the following functionalities of the Random Number Generator (RNG) peripheral: + Initialization/de-initialization functions + Peripheral Control functions + Peripheral State functions.
file	stm32f4xx_hal_rtc.c [code]
	RTC HAL module driver. This file provides firmware functions to manage the following functionalities of the Real Time Clock (RTC) peripheral: + Initialization and de-initialization functions + RTC Time and Date functions + RTC Alarm functions + Peripheral Control functions + Peripheral State functions.
file	stm32f4xx_hal_rtc_ex.c [code]
	RTC HAL module driver. This file provides firmware functions to manage the following functionalities of the Real Time Clock (RTC) Extension peripheral: + RTC Time Stamp functions + RTC Tamper functions + RTC Wake-up functions + Extension Control functions + Extension RTC features functions.
file	stm32f4xx_hal_sai.c [code]
	SAI HAL module driver. This file provides firmware functions to manage the following functionalities of the Serial Audio Interface (SAI) peripheral: + Initialization/de-initialization functions + I/O operation functions + Peripheral Control functions + Peripheral State functions.
file	stm32f4xx_hal_sai_ex.c [code]
	SAI Extension HAL module driver. This file provides firmware functions to manage the following functionalities of SAI extension peripheral: + Extension features functions.
file	stm32f4xx_hal_sd.c [code]
	SD card HAL module driver. This file provides firmware functions to manage the following functionalities of the Secure Digital (SD) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + SD card Control functions.
file	stm32f4xx_hal_sdram.c [code]
	SDRAM HAL module driver. This file provides a generic firmware to drive SDRAM memories mounted as external device.
file	stm32f4xx_hal_smartcard.c [code]
	SMARTCARD HAL module driver. This file provides firmware functions to manage the following functionalities of the SMARTCARD peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_spdifrx.c [code]
	This file provides firmware functions to manage the following functionalities of the SPDIFRX audio interface: + Initialization and Configuration + Data transfers functions + DMA transfers management + Interrupts and flags management.
file	stm32f4xx_hal_spi.c [code]
	SPI HAL module driver. This file provides firmware functions to manage the following functionalities of the Serial Peripheral Interface (SPI) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State functions.
file	stm32f4xx_hal_sram.c [code]
	SRAM HAL module driver. This file provides a generic firmware to drive SRAM memories mounted as external device.
file	stm32f4xx_hal_tim.c [code]
	TIM HAL module driver. This file provides firmware functions to manage the following functionalities of the Timer (TIM) peripheral: + Time Base Initialization + Time Base Start + Time Base Start Interruption + Time Base Start DMA + Time Output Compare/PWM Initialization + Time Output Compare/PWM Channel Configuration + Time Output Compare/PWM Start + Time Output Compare/PWM Start Interruption + Time Output Compare/PWM Start DMA + Time Input Capture Initialization + Time Input Capture Channel Configuration + Time Input Capture Start + Time Input Capture Start Interruption + Time Input Capture Start DMA + Time One Pulse Initialization + Time One Pulse Channel Configuration + Time One Pulse Start + Time Encoder Interface Initialization + Time Encoder Interface Start + Time Encoder Interface Start Interruption + Time Encoder Interface Start DMA + Commutation Event configuration with Interruption and DMA + Time OCRef clear configuration + Time External Clock configuration.
file	stm32f4xx_hal_tim_ex.c [code]
	TIM HAL module driver. This file provides firmware functions to manage the following functionalities of the Timer extension peripheral: + Time Hall Sensor Interface Initialization + Time Hall Sensor Interface Start + Time Complementary signal bread and dead time configuration + Time Master and Slave synchronization configuration.
file	stm32f4xx_hal_uart.c [code]
	UART HAL module driver. This file provides firmware functions to manage the following functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Errors functions.
file	stm32f4xx_hal_usart.c [code]
	USART HAL module driver. This file provides firmware functions to manage the following functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions.
file	stm32f4xx_hal_wwdg.c [code]
	WWDG HAL module driver. This file provides firmware functions to manage the following functionalities of the Window Watchdog (WWDG) peripheral: + Initialization and de-initialization functions + IO operation functions + Peripheral State functions.
file	stm32f4xx_ll_adc.c [code]
	ADC LL module driver.
file	stm32f4xx_ll_crc.c [code]
	CRC LL module driver.
file	stm32f4xx_ll_dac.c [code]
	DAC LL module driver.
file	stm32f4xx_ll_dma.c [code]
	DMA LL module driver.
file	stm32f4xx_ll_dma2d.c [code]
	DMA2D LL module driver.
file	stm32f4xx_ll_exti.c [code]
	EXTI LL module driver.
file	stm32f4xx_ll_gpio.c [code]
	GPIO LL module driver.
file	stm32f4xx_ll_i2c.c [code]
	I2C LL module driver.
file	stm32f4xx_ll_lptim.c [code]
	LPTIM LL module driver.
file	stm32f4xx_ll_pwr.c [code]
	PWR LL module driver.
file	stm32f4xx_ll_rcc.c [code]
	RCC LL module driver.
file	stm32f4xx_ll_rng.c [code]
	RNG LL module driver.
file	stm32f4xx_ll_rtc.c [code]
	RTC LL module driver.
file	stm32f4xx_ll_spi.c [code]
	SPI LL module driver.
file	stm32f4xx_ll_tim.c [code]
	TIM LL module driver.
file	stm32f4xx_ll_usart.c [code]
	USART LL module driver.
file	stm32f4xx_ll_utils.c [code]
	UTILS LL module driver.